KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第845页

40 423 ： Failure in c reating m em ory for the Im age DP. 424 ： Failure in c reating m em ory for the Cyclic data array. 425 ： Failure in c reating m em ory for the Master 1 Schedule data. 426 ： Failure in c reating m em…

100%1 / 1361
39
102 ： MC starting procedure 2 error
103 ： MC starting procedure 3 error
104 ： MC starting procedure 4 error
105 ： MC starting procedure 5 error
106 ： TIME-OUT of driver initialization（5min.）
107 ： TIME-OUT of the main process initialization on the MC side.
200 ： MC presence check.
401 ： Failure in creating memory for design value data.
402 ： Failure in creating memory for MS parameter
403 ： Failure in creating memory for Mech. Control parameter.
404 ： Failure in creating memory for Mech-pos.
405 ： Failure in creating memory for the operation options.
406 ： Failure in creating memory for Setup data.
407 ： Failure in creating memory for historical information.
408 ： Failure in creating memory for error log.
409 ： Failure in creating memory for the data on the MM side.
40A ： Failure in creating memory for the production program file header.
40B ： Failure in creating memory for the PWB data.
40C ： Failure in creating memory for the Placement data.
40D ： Failure in creating memory for the Component data.
40E ： Failure in creating memory for the Pick data.
40F ： Failure in creating memory for the Mark data.
410 ： Failure in creating memory for the Extended Mark data.
411 ： Failure in creating memory for the Vision data.
412 ： Failure in creating memory for the Optimization data.
413 ： Failure in creating memory for the Production Management Information.
414 ： Failure in creating memory for the Adhesive data.
415 ： Failure in creating memory for the Production Condition.
416 ： Failure in creating memory for the Station data.
417 ： Failure in creating memory for the Extended Placement data.
418 ： Failure in creating memory for the MTC data.
419 ： Failure in creating memory for the MTS data.
41A ： Failure in creating memory for the MSP data.
41B ： Failure in creating memory for the CAB list.
41C ： Failure in creating memory for the Vision data array.
41D ： Failure in creating memory for the Vision Control.
41E ： Failure in creating memory for the Extended New Vision data.
41F ： Failure in creating memory for the Element GDP.
420 ： Failure in creating memory for the Element DP.
421 ： Failure in creating memory for the Extended ADP.
422 ： Failure in creating memory for the External DP.
40
423 ： Failure in creating memory for the Image DP.
424 ： Failure in creating memory for the Cyclic data array.
425 ： Failure in creating memory for the Master1 Schedule data.
426 ： Failure in creating memory for the Master2 Schedule data.
427 ： Failure in creating memory for the Machine Management Information.
428 ： Failure in creating memory for the Nozzle Usage Information.
429 ： Failure in creating memory for the resumptive production.
42A ： Failure in creating memory for the System Common data.
20000 ： Failure in starting the Data Manager.
40000 ： Failure in creating the Mail box.
80000 ： Failure in creating IPC for command response.
100001 ： Failure in starting the main process of the Error Manager
100002 ： Failure in starting the error process thread1.
100003 ： Failure in starting the error process thread2.
100004 ： Failure in starting the error process thread3.
100005 ： Failure in starting the error process thread4.
800000 ： Failure in starting the non-synchronized process.
1000001 ： Failure in starting the external communication process.
1000002 ： Failure in hand-shaking with the external communication process.
4000001 ： NT error（OLE server）
4000002 ： NT error(Specifying a dispatch command)
4000003 ： Failure in learning the Vision version.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, please take a note of the error
number and contact our technical service dept. for information.
W102900 “System is closing all processes. And getting into the shut-down
process. Are you sure?”
[Cause] All the programs currently running are aborted and WindowsNT starts the
shut-down session.
[Treatment] Please press ‘Yes’ to end the system. If you do not want to finish the system,
please press ‘No’.
E105010 “Fatal error occurred in constructing memory structure. Abort the
process”
[Cause] A critical error occurred while saving or initializing the system memory.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that a system file
is broken.
Please take a note of the error number and contact our technical service dept. for
information.
W105110 “The saving program has no name. Please put the name?”
[Cause] The program to save does not have a name yet. It has a temporary name
(UNTITLED) now.
41
[Treatment] Please name the file before saving it.
W105120 “The same named file exists. Do you want to overwrite the file?”
[Cause] There is a file which has the same name as your file in the directory that you are
trying to save your file in.
[Treatment] When you do not need to rename your file, press ‘OK’. If you need to save your
file with a different name, press ‘Cancel’ and rename the file.
E106010 “Failed to start the data-manager. Abort the process”
[Cause] Failed to start the Data Manager.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that Machine
Information Database, Machine Control Data file, Flash Memory for saving
Control Data, or NT registry setting has a problem.
Please take a note of the error number and contact our technical service dept. for
information.
W106020 “Illegal password. Retrieve the default group settings”
[Cause] When changing the user level, the password was wrong.
[Treatment] Please enter the right password in the User level setting again.
If you do not remember your password, please take a note of the error number
and contact our technical service dept. for information.
E107100 “Failed to create asynchronous threads. Abort the process”
[Cause] Failed to start the non-synchronized process.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that a system file
is broken.
Please take a note of the error number and contact our technical service dept. for
information.
E108010 “Failed to start up MC system. Abort the process”
[Cause] Failed to start MC (Machine Control System).
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, something is wrong with XMP board
or other connectors.
Please take a note of the error number and contact our technical service dept. for
information.