KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第535页
6 − 159 − <Ex it (ESC )> button Returns to t he previous screen displayed before you invoke t his dialog box. ◇ Shortcut k eys On this SOT direct ion continuous inspection result dialog box, the following short cut…
6 − 158
6.7.3.6 SOT direction continuous inspection
6.7.3.6.1 SOT direction continuous inspection dialog box
When you select the [Tool] command from the menu bar, the [Check] command o
the “Tool” menu, and the [SOT direction continuous inspection] command on the
Production menu, the following dialog box appears on the screen.
Figure 6.7.3.6.1 SOT direction continuous inspection dialog box
− SOT inspection type
Specify whether to inspect only components that satisfy a certain requirement
among components whose data is stored in Component data.
①
All components
The system inspects all components whose data is stored in Component
data.
②
Range specification
Check this radio button if you want to check the components whose
numbers are specified by you. When you check this radio button, you
can specify the following items:
− Start compo. No.
Check this check box if you are to specify the number of the first
component to be checked. After checking this check box, enter the
first component number in the edit box.
− End compo. No.
Check this check box if you are to specify the number of the last
component to be checked. After checking this check box, enter the
last component number in the edit box.
− Only placement compo.
Check this check box to check components that are actually to be
placed and whose data is stored in Placement data only.
− <Inspection> button
Starts an SOT direction inspection continuously.
6 − 159
− <Exit (ESC)> button
Returns to the previous screen displayed before you invoke this dialog
box.
◇
Shortcut keys
On this SOT direction continuous inspection result dialog box, the
following shortcut keys are available.
Table 6.7.3.6.1 Shortcut keys
Keyboard Operation
panel
HOD key Action
SRART Starts continuous SOT inspection.
ESC Returns to the previous screen.
6.7.3.6.2 Dialog box for returning a checked component
Immediately after starting the continuous inspection, the system displays the dialog
box that asks you how to handle a checked component.
Figure 6.7.3.6.2 “Question” dialog box that asks you how to return a checked
component
①
Throw away every time
The system discards a component according to the setting of “Compo Reject
to” on the Component data screen.
②
Return every time
The system returns a component to its original position.
③
Inquires every time
The system displays a dialog box that asks you how to handle a component
every time it finishes checking.
6 − 160
6.7.3.6.3 “Under the SOT direction continuous inspection…” dialog box
During continuous inspection, the system displays the following dialog box on
which data on a component being checked, the inspection progress, and the
inspection result are displayed.
Figure 6.7.3.6.3 “Under the SOT direction continuous inspection…” dialog box
− Result of SOT direction inspection
After inspection, the result is displayed here, OK or NG.
6.7.3.6.4 Interruption dialog box
To interrupt the inspection being executed forcibly, press the <STOP> button.
The following dialog box appears on the screen. Select whether to stop the
inspection or not.
Figure 6.7.3.6.4 “Question” dialog box for interrupting the current inspection