KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第895页

90 the Vision board” [Cause] T he entered bank m ark data is not c orrect. [Treatm ent] Pleas e re-boot your mac hine. E501406 “[Vi sion] Fai led to tr ansmit BOC mark recogni tion condit ion data t o the Vision board” […

100%1 / 1361
89
E501203 “DTS is not in the executable status. Would you like to have DTS
return to Home position?”
[Cause] This error occurs if DTS Home returning has not been complete when starting a
production.
[Treatment] OK button : Performs DTS Home returning.
Cancel button : Will have you back to the status that is before pressing START
key.
E501204 “DTS is not in the executable status. Would you like to have DTS
return to Home Position?”
[Cause] This error occurs if DTS is in the executable status when starting a production.
[Treatment] OK button : Performs Home returning.
Cancel button : Will have you back to the status that is before pressing START
key.
E501205 “DTS is in the supplying status. Please release DTS from the status”
[Cause] This error occurs if DTS is in the supplying status when starting a production.
[Treatment] Please disable the supply status of DTS and press OK button. Pressing Cancel
button will have you back to the status that is before pressing START key.
E501300 “No tracing data”
[Cause] This error occurs if there is not data to trace on the specified station when
executing tracing.
[Treatment] Please press OK button to continue the process.
E501400 “[Vision] Memory access error”
[Cause] There is not enough memory.
[Treatment] Please re-start the application.
E501401 “[Vision] Failed to collect System condition data”
[Cause] The system information is wrong.
[Treatment] Please re-boot your machine.
E501402 “[Vision] Failed to collect Mark recognition condition data”
[Cause] The entered mark data is not correct.
[Treatment] Please go to the Production Program Editor and check the mark data.
E501403 “[Vision] Failed to collect Component recognition condition data”
[Cause] The entered vision data is not correct.
[Treatment] Please go to the Production Program Editor and check the mark data.
E501404 “[Vision] Failed to transmit System condition data to the Vision
board”
[Cause] The system information is wrong.
[Treatment] Please re-boot your machine.
E501405 “[Vision] Failed to transmit Bankmark recognition condition data to
90
the Vision board”
[Cause] The entered bankmark data is not correct.
[Treatment] Please re-boot your machine.
E501406 “[Vision] Failed to transmit BOC mark recognition condition data to
the Vision board”
[Cause] The entered BOC mark data is not correct.
[Treatment] Please go to the Production Program Editor and check the PWB data.
E501407 “[Vision] Failed to transmit IC mark recognition condition data to
the Vision board”
[Cause] The entered IC mark data is not correct.
[Treatment] Please go to the Production Program Editor and check the Placement data.
E501408 “[Vision] Failed to transmit Component recognition condition data
to the Vision board”
[Cause] The entered vision data is not correct.
[Treatment] Please go to the Production Program Editor and check the Vision data.
E501409 “[Vision] Data index error exceeds the specified range”
[Cause] This is a program error.
[Treatment] Please take a note of the error code and contact our technical service dept. for
information.
E501410 “[Vision] Unknown request (Program error)”
[Cause] This is a program error.
[Treatment] Please take a note of the error code and contact our technical service dept. for
information.
E503001 “Retry List message file (RETRYLIST.MSG) cannot be opened”
[Cause] Failed to open the Retry List message file.
[Treatment] Please re-install the system.
E503100 “You try to set remain less than level now, OK?”
[Cause] The number of components remaining becomes less than the warning level of the
number of components left.
[Treatment] Yes : Sets the entered number of components remaining.
No : Gets you back to the number of components remaining that is before you
set.
91
E503200 “It is not Program made by setting non-stop. A normal operation is
not occasionally done when producing as it is. Production start
forcibly?”
[Cause] This message appears when the Non-stop functionality is enabled in the
Operation Option but the production program does not take Non-stop.
[Treatment] Please disable the Non-stop functionality in the Operation Option, or check the
Pick data in the production program.
E503300 “%s feeder bank is in lower position”
[Cause] This message appears if a feeder bank is descending down when starting a
production.
? : where the feeder bank is descending to.
On the front side
On the rear side
On both sides.
[Treatment] Please press OK button after the feeder bank has ascended.
E503301 “MTC is in motion. Please wait for stop”
[Cause] This message appears if MTS is in operation when starting a production.
[Treatment] Please press OK button after MTC’s motion has been done. Pressing Cancel
button will have you back to the status that is before pressing START key.
E503302 “Cover open”
[Cause] This message appears at the beginning of a production if the production can not
be produced with the cover open.
[Treatment] Please close the cover and press the START key again.
E503400 “The sequence(%s) you selected is different from the one(%s) of
when the production got suspended illegally last time. Would you
like to resume the production?”
[Cause] This message appears if the current sequence and the previous sequence are
different from each other when resuming the production.
? : Sequence
Input order
Optimization order
[Treatment] OK button : Starts the production with the sequence being different from the
previous one. There is a possibility that PWBs will be incomplete.
Cancel button : Will have you back to the status that is before pressing START
key.