KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第435页
6 − 59 6.3.3.3 Pi ck point correcti on using the Retr y list (supplier i nformation) dialog box W hen the Retry list (supplier inf orm ation) dialog box appears, select the [ Pick tr ack] button. Pick point t racking of …
6 − 58
CAUTION
If the feeder bank is never recognized (since the machine zeros or the
bank moves down then up), it may be recognized automatically before
the machine moves to the pick position.
Since the head moves across the feeder bank while the feeder is being
recognized, do not place your hand or head in the machine, nor move
your hand or face close to the machine. Especially, extreme care is
required when the feeder bank is recognized not from the menu but
during teaching or tracking a pick position.
③ Tracking operation and teaching
During tracking operation, in the same manner as the other pick point camera
tracking operations, operation can be done using the <START> switch and the
<STOP> switch of the panel of the main unit and the HOD. Teaching of pick
coordinates is also possible.
Figure 6.3.3.2.3 "Coordinate Teaching" dialog box
④ Finishing pick point correction
When pressing the <Exit> button on the "Pick pos. adjust condition" dialog box,
the number of components setup operation is performed for all pick data of the
components listed as component ID here, regarding that the feeder change and,
etc. have been completed. Then, pick point correction process is finished and the
Retry list dialog box appears again.
⑤ Other operations
The other operations during pick point correction are the same as those for pick
point tracking.
6 − 59
6.3.3.3 Pick point correction using the Retry list (supplier information) dialog box
When the Retry list (supplier information) dialog box appears, select the [Pick track]
button. Pick point tracking of the feeders selected in the list box is performed, and its
pick point can be corrected. The feeders subject to pick point correction are fully
loaded automatically.
Figure 6.3.3.3.1 Retry list (Supplier information) dialog box
6.3.3.4 Operation
① Starting tracking operation
When the <Pick track> button is selected on the Retry list dialog box, the "Pick
camera tracking" dialog box appears on the screen immediately, and the head
moves to the pick point of the feeder displayed in the list box. This operation is the
same as that of pick point tracking operation (manual operation) when only one
piece of pick data exists.
Using the device key of the HOD, teaching of pick points is also possible here.
② Fishing pick point correction
When tracking of the subject pick data (one piece of the data) has been
completed, tracking operation is finished automatically, and the Retry list dialog
box appears again.
6 − 60
6.3.4 Printing the Retry List
When you select the [File] command on the menu bar, the [Print] command on the
displayed menu, and the [Retry List] command after PWB production, the retry list
printing dialog box appears on the screen.
− Select the data to be printed with checking either of the “Output Type” radio
buttons.
− If the retry list cannot be displayed, you cannot select the [Print] command on the
[File] menu.
Figure 6.3.4 Retry list printing dialog box
When you click the <Print> button, the system starts printing the specified data.
When you click the <as Text File> button, the “File Save” dialog box appears on
the screen. Specify the path and file name, then click the <Save> button. The
specified data is output as a text file.
When you click the <Cancel> button, the display returns to the screen displayed
before you selected the [Print] command.