KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第639页
8 − 50 8.5.3 DTS control W hen y ou select t he [Feeder] com mand on the [Ct rl] menu, then [DT S control] command, t he following "DT S control" dialog box appears on the screen. Figure 8.5. 3 DTS control dial…
8 − 49
(4) Control button
Each control item can be executed with the control button.
The display of the control buttons varies depending on the control item you
selected.
1) Tape feeding action
This item feeds a tape.
When the control item “Tape feeding action” is checked, select the< EXEC>
button, or press the F3 key to control the tape feed.
2) Direct knock action
This item executes knock operation per feeder bank.
When the control item “Direct knock action” is checked, select the< “EXEC>
button, or press the F3 or F4 key to control the direct knock.
3) FPI cont. (Independent)
This item turns on and/ or off the feeder position indicator.
When the control item “FPI cont.” is checked, select the <ON>, <OFF>,
<ON/OFF> or <BLINK> button, or press the F3, F4, F5 or F6 key.
4) FPI cont. (All)
This item turns on and/ or off the feeder position indicators on the front
feeder bank or rear feeder bank.
When the control item “FPI cont.” is checked, select the <ON>, <OFF>,
<ON/OFF)> or <BLINK> button, or press the F3, F4, F5 or F6 key.
8 − 50
8.5.3 DTS control
When you select the [Feeder] command on the [Ctrl] menu, then [DTS control]
command, the following "DTS control" dialog box appears on the screen.
Figure 8.5.3 DTS control dialog box
(1) Control item
Select a control item with the corresponding radio button.
(2) Speed
Select the speed to be controlled with the corresponding radio button.
8 − 51
(3) Control button
Each control item can be executed with the control button.
The displayed control buttons vary depending on the control item you selected.
1) Tray
This item extends and/or stores a tray.
- When the control item "Tray" is checked, click the <TrayA>, <TrayB> or
<A/B> button or press the F3, F4 or F5 key to control a tray.
The state of a tray is updated when it is controlled completely.
(4) State display
Each unit state is displayed when it is controlled completely.