KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第844页

39 102 ： MC starting pr ocedure 2 err or 103 ： MC starting pr ocedure 3 err or 104 ： MC starting pr ocedure 4 err or 105 ： MC starting pr ocedure 5 err or 106 ： T IME-OUT of driver initialization （ 5m in. ） 107 ： T IME-O…

100%1 / 1361
38
B. CORRECTIVE ACTIONS
E100010 “Failed to initialize the Windows Socket”
[Cause] A critical error occurred while initializing the system.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine
If the error occurs even after the rebooting, there is a possibility that a system file
is broken.
Please take a note of the error number and contact our technical service dept. for
information.
E100020 “Failed to initialize OLE. Confirm the OLE Library version”
[Cause] An error occurred while starting the axis control process.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine
If the error occurs even after the rebooting, there is a possibility that a system file
is broken.
Please take a note of the error number and contact our technical service dept. for
information.
E102010 “Fatal system error occurred. Abort the process”
[Cause] A critical error occurred while initializing the system.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that a system file
is broken.
Please take a note of the error number and contact our technical service dept. for
information.
E102020 “You tried to start up, before the end of the previous system
program. Exit the system program, and start again”
[Cause] The next main process got started before the main process fully completed.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that a system file
is broken.
Please take a note of the error number and contact our technical service dept. for
information.
E102100 “There was a fatal failure while starting the KE-2000 system.
Avoiding the possible damages, the system is going to abort the
process. (error code = %d)”
[Cause] A critical error occurred during the initialization.
The details of the error during the initialization are shown and the system is shut
down.
? : Detailed error code (Hexadecimal display)
0 ∼ 3F ： Failure count in creating flags to manage events
40 ： Failure count in initializing IPC for internal communication
100 ： MC starting error.
101 ： MC starting procedure 1 error
39
102 ： MC starting procedure 2 error
103 ： MC starting procedure 3 error
104 ： MC starting procedure 4 error
105 ： MC starting procedure 5 error
106 ： TIME-OUT of driver initialization（5min.）
107 ： TIME-OUT of the main process initialization on the MC side.
200 ： MC presence check.
401 ： Failure in creating memory for design value data.
402 ： Failure in creating memory for MS parameter
403 ： Failure in creating memory for Mech. Control parameter.
404 ： Failure in creating memory for Mech-pos.
405 ： Failure in creating memory for the operation options.
406 ： Failure in creating memory for Setup data.
407 ： Failure in creating memory for historical information.
408 ： Failure in creating memory for error log.
409 ： Failure in creating memory for the data on the MM side.
40A ： Failure in creating memory for the production program file header.
40B ： Failure in creating memory for the PWB data.
40C ： Failure in creating memory for the Placement data.
40D ： Failure in creating memory for the Component data.
40E ： Failure in creating memory for the Pick data.
40F ： Failure in creating memory for the Mark data.
410 ： Failure in creating memory for the Extended Mark data.
411 ： Failure in creating memory for the Vision data.
412 ： Failure in creating memory for the Optimization data.
413 ： Failure in creating memory for the Production Management Information.
414 ： Failure in creating memory for the Adhesive data.
415 ： Failure in creating memory for the Production Condition.
416 ： Failure in creating memory for the Station data.
417 ： Failure in creating memory for the Extended Placement data.
418 ： Failure in creating memory for the MTC data.
419 ： Failure in creating memory for the MTS data.
41A ： Failure in creating memory for the MSP data.
41B ： Failure in creating memory for the CAB list.
41C ： Failure in creating memory for the Vision data array.
41D ： Failure in creating memory for the Vision Control.
41E ： Failure in creating memory for the Extended New Vision data.
41F ： Failure in creating memory for the Element GDP.
420 ： Failure in creating memory for the Element DP.
421 ： Failure in creating memory for the Extended ADP.
422 ： Failure in creating memory for the External DP.
40
423 ： Failure in creating memory for the Image DP.
424 ： Failure in creating memory for the Cyclic data array.
425 ： Failure in creating memory for the Master1 Schedule data.
426 ： Failure in creating memory for the Master2 Schedule data.
427 ： Failure in creating memory for the Machine Management Information.
428 ： Failure in creating memory for the Nozzle Usage Information.
429 ： Failure in creating memory for the resumptive production.
42A ： Failure in creating memory for the System Common data.
20000 ： Failure in starting the Data Manager.
40000 ： Failure in creating the Mail box.
80000 ： Failure in creating IPC for command response.
100001 ： Failure in starting the main process of the Error Manager
100002 ： Failure in starting the error process thread1.
100003 ： Failure in starting the error process thread2.
100004 ： Failure in starting the error process thread3.
100005 ： Failure in starting the error process thread4.
800000 ： Failure in starting the non-synchronized process.
1000001 ： Failure in starting the external communication process.
1000002 ： Failure in hand-shaking with the external communication process.
4000001 ： NT error（OLE server）
4000002 ： NT error(Specifying a dispatch command)
4000003 ： Failure in learning the Vision version.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, please take a note of the error
number and contact our technical service dept. for information.
W102900 “System is closing all processes. And getting into the shut-down
process. Are you sure?”
[Cause] All the programs currently running are aborted and WindowsNT starts the
shut-down session.
[Treatment] Please press ‘Yes’ to end the system. If you do not want to finish the system,
please press ‘No’.
E105010 “Fatal error occurred in constructing memory structure. Abort the
process”
[Cause] A critical error occurred while saving or initializing the system memory.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that a system file
is broken.
Please take a note of the error number and contact our technical service dept. for
information.
W105110 “The saving program has no name. Please put the name?”
[Cause] The program to save does not have a name yet. It has a temporary name
(UNTITLED) now.