KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第764页

13 − 8 13.2.5 A ir filter (CA L block) Check the elem ent of the air f ilter (CAL block) f or dirt. If the element is dirty, det ach the air tube and r eplace the f ilter with a new air filt er (Par t No. PF010001000). N…

13 − 7

13.2.4 Air filter (Head)

1) Loosen the screw ② fixing the Z slide shaft ① to pull out the nozzle outer shaft

③.

2) Check to see if there is any contamination of the filter ④.

3) If any, remove the filter ④ from the nozzle outer shaft, the replace it with a new

one.

4) Push the nozzle outer shaft ③ into the Z slide shaft ①, then fix it with the screw

②.

Filter ④: Part number E3052729000

WARNING

To prevent the body from injury which can be caused by accidental

activation of the machine, turn off the power of the machine before

following the operation above.

④

③

②

①

13 − 8

13.2.5 Air filter (CAL block)

Check the element of the air filter (CAL block) for dirt. If the element is dirty, detach

the air tube and replace the filter with a new air filter (Part No. PF010001000).

Note: Install the air filter with its hole (part A) facing up.

WARNING

To prevent the body from injury which can be caused by accidental

activation of the machine, turn off the power of the machine before

following the operation above.

Air tube

Part A

13 − 9

13.2.6 Transport belt

Check that the belt is severely worn-out, damaged, or stretched. If it is necessary to

replace the belt, follow the procedure below.

1) Loosen the screws used to fix the transport pulleys (one at the front and the other

at the rear) attached to the long hole at part A in Figure 13.2.6.1, to untension the

transfer belt.

Figure 13.2.6.1

2) Loosen the flat screw or hexagonal-hole-headed bolt of the transport rails to

remove the transport belt guide. Then remove, then attach the transport belt.

Figure 13.2.6.2

WARNING

To prevent the body from injury which can be caused by accidental

activation of the machine, turn off the power of the machine before

following the operation above.

Part A

Part A Part A

Flat screw or

hexagonal-hole-headed bolt