KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第1158页
75 I318011 “Set online for M TC” [Cause] F ailed to draw shuttle out from MT C sinc e MTC was not online. [Treatm ent] Pleas e m ak e MTC online. I318021 “Set online for M TS” [Cause] MT S was not online. [Treatm ent] Pl…
74
[Treatment]
E316503 “The PWB was detected in the transportation road”
[Cause] A PWB was detected on the conveyor.
[Treatment] “OK” will abort the process.
Q317001 “Exit manual control. Reset I/O?”
[Cause] This message appears when you choose to exit the Manual control. You are
asked if to set each I/O in the safety direction
[Treatment] “YES” button will sets I/O in the safety direction. “NO” button will discontinue to
exit the Manual control.
Q317011 “Return to home has not yet been completed. Return to home?”
[Cause] The axis has not yet been returned to home. You are asked if you want to
perform the Home returning.
[Treatment] “YES” button will return the axis to home, and continue the process. “NO” button
will not return the axis to home, and continue the process.
Q317021 “Cannot return component. Trash component?”
[Cause] A component was detected in the Component presence checking that is
performed when returning nozzle to ATC. The component can not be returned
since its pick position is unknown. You are asked if the component can be
disposed.
[Treatment] “YES” button will dispose the component at a disposal position. “NO” button will
move the head to the waiting position for nozzle removal, and request for a
manual component removal.
Q317031 “Do you interrupt process? ”
[Cause] STOP switch was pressed. You are asked if to abort the process.
[Treatment] “YES” button will abort the process. “NO” button will resume the process.
Q317041 “Is the tray of MTS stored?”
[Cause] “Exit MTS control screen” was chosen with MTS tray was drawn out.
[Treatment] “YES” will store the tray into MTS and exit the screen.
“NO” will exit the screen
with MTS tray is drawn out of MTS.
I318001 “Remove the component from %s”
[Cause] The nozzle could not be returned to ATC since something, such as a component,
was on the nozzle.
[Treatment] ?Please remove the component off the head manually.
75
I318011 “Set online for MTC”
[Cause] Failed to draw shuttle out from MTC since MTC was not online.
[Treatment] Please make MTC online.
I318021 “Set online for MTS”
[Cause] MTS was not online.
[Treatment] Please make MTS online.
I318022 “Please close the door of MTS”
[Cause] Failed to draw a tray out from MTS since MTS door was open.
[Treatment] Please close the MTS door.
I318023 “Remove the PWB on Conveyor”
[Cause] A PWB was detected on the conveyor.
[Treatment] Please removed the PWB on the conveyor.
76
E397001 “Memory allocation error”
[Cause] The working space can not be saved.
[Treatment] Please add some more memory available to save the working space.
E397002 “Shared memory open error”
[Cause] The shared memory could not be opened.
[Treatment] Please contact our technical service dept. for information.
E397011 “Return to home has not yet been completed”
[Cause] The axis can not move until Home returning has been complete.
[Treatment] Please press the ORIGIN switch to perform Home returning.
E397012 “Servo is in the free state”
[Cause] The axis could not move since the servo is in the free status.
[Treatment] In order to move the axis, please press the Servo Free switch to lock the servo.