KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第1163页
80 ? : The nam e of the window that y ou f ailed to create. [Treatm ent] There is a possibility that enough working spac e is not being saved. Pleas e add so me mo re memo ry av ai la bl e. E500002 “There is no memory en…
79
E399101 “Memory allocation error”
[Cause] The working space can not be saved.
[Treatment] Please add some more memory available to save the working space.
E399102 “Shared memory open error”
[Cause] The shared memory could not be opened.
[Treatment] Please contact our technical service dept. for information.
W399111 “Return to home has not yet been completed”
[Cause] The axis can not move until Home returning has been complete.
[Treatment] Please press the ORIGIN switch to perform Home returning.
W399112 “Servo is in the free state”
[Cause] The axis could not move since the servo is in the free status.
[Treatment] In order to move the axis, please press the Servo Free switch to lock the servo.
Q399201 “Do you continue reset I/O?”
[Cause]
？
An error occurred in the safety direction setting (of the objective unit).
？：
The unit that had the error
？？：
The action of the error
[Treatment] “YES” button will resume the safety direction setting.
“NO” button will abort the safety direction setting.
Q399211 “cannot return component of %s. Trash component?”
[Cause] The nozzle could not be returned to ATC since something, such as a component,
is on the nozzle. The nozzle has to be returned in order to return the nozzle to
ATC. However, the original position of the component is not clear. You are asked
if to dispose the component.
[Treatment] “YES” button will dispose the component to the disposal position.
“NO” button will move the head to the waiting position for nozzle removal, and
request for a
manual component removal
I399301 “Remove the component from %s”
[Cause] The nozzle could not be returned to ATC since something, such as a component,
was on the nozzle.
[Treatment] Please remove the component off the head manually.
I399311 “Set online for MTC”
[Cause] Failed to set the safety direction for MTC since MTC was not online.
[Treatment] Please make MTC online.
I399312 “Set online for MTS”
[Cause] MTS was not online.
[Treatment] Please make MTS online.
E500001 “Window create error(%s)”
[Cause] Failed to create a window.
80
? : The name of the window that you failed to create.
[Treatment] There is a possibility that enough working space is not being saved. Please add
some more memory available.
E500002 “There is no memory enough <%s>”
[Cause] An error occurred while reading the data from or writing the date in the file.
? : An action that is a cause of the error
Memory
：
Getting the production program storage memory
Read File
：
Reading the production program in.
Write File
：
Writing into the production program.
LockFile
：
A lock for the file.
Free Memory
：
Releasing the production program storage memory.
? : Error code
9008
：
File open error
9009
：
File close error
9010
：
File reading error
9014
：
The file can not be found.
9020
：
Memory saving error
9021
：
Memory releasing error
9028
：
File in-use error
9029
：
File type error
9030
：
Parameter error
[Treatment] This is a program error. Please make a note of the cause of the error and the
error code, then contact our technical service Dept. for information.
E500003 “File reading error”
[Cause] Failed to read the data from the file.
? : The name of the file you tried to read from.
[Treatment] Please re-install the system.
E500004 “The file can not be displayed <Err No : ?>”
[Cause] The wordpad that displays an error or a warning in the production program check
prior to a production can not be displayed.
?? : Error cause code
[Treatment] This is a program error. Please make a note of the cause of the error and the
error code, then contact our technical service Dept. for information.
E500100 “Incorrect character has been input”
[Cause] You tried to enter incorrect data.
[Treatment] Please re-enter correct data.
81
E500101 “Input range has been exceeded. The resumption position of a
placement point is set outside of the possible range”
[Cause] The entered resumption position of a placement point exceeded the input range.
[Treatment] Please enter the value that is under the maximum number of placement points.
E500102 “Input range has been exceeded. (Input range: %ld - %ld)”
[Cause] The input value exceeded the input range.
? - ? : The maximum and minimum values of the input range.
[Treatment] Please enter a value that is within the input range.
E500200 “PWB data has not been completed”
[Cause] The production can not be started since the PWB data of the Production program
that is currently loaded on the memory is incomplete.
[Treatment] Please go to the Production Program Editor and complete the PWB data.
E500201 “Placement data has not been completed”
[Cause] The production can not be started since the Placement data of the Production
program that is currently loaded on the memory is incomplete. However,
‘complete’ here applies only to the placement data that will actually be placed (the
placement data that will be skipped is not included), and production programs
that are considered as ‘incomplete’ in the Production Program Editor may
become ‘complete’ in the production.
[Treatment] Please go to the Production Program Editor and complete the Placement data.
E500202 “Component data has not been completed”
[Cause] The error is likely to happen when starting a production by pressing the START
button on the operation panel. The production can not be started since the PWB
data of the Production program that is currently loaded on the memory is
incomplete.
[Treatment] Please go to the Production Program Editor and complete the PWB data.
E500203 “Pick-up data has not been completed”
[Causes] The production can not be started since the Pick data of the Production program
that is currently loaded on the memory is incomplete. However, ‘complete’ here
applies only to the pick data that will actually be picked (a pick data which is set to
“not use” is not included), and production programs that are considered as
‘incomplete’ in the Production Program Editor may become ‘complete’ in the
production.
[Treatment] Please go to the Production Program Editor and complete the Pick data.
E500204 “Mark data has not been completed”
[Cause] The production can not be started since the Mark data of the Production program
that is currently loaded on the memory is incomplete.
[Treatment] Please go to the Production Program Editor and see the BOC mark setting of the
PWB data and the IC mark setting of the Placement data.