Omron V-TS Teaching Manual.pdf.pdf - 第101页
Chapter 2 Inspecti on Programm ing 2-74 To create a com ponent num ber group based on this c omponent number, click [Create com ponent number group]. A com ponent number group is crea ted si multaneously with the compone…
2.4 Registering for Inspection
2-73
2.
Specify electrode information for individual electrode groups.
Select an electrode window belonging to the target electrode group.
Click to select the electrode window in the image display area, or
click the electrode in the Electrode Group List.
3.
Select the electrode type in the list box.
Some electrode types may not be specified depending on the
component type.
The selection of the electrode type is restricted depending on the
comonent type. Refer to "Electrode Types" for details.
4.
Specify the electrode height (Unit: mm).
The value is rounded at the 3rd decimal place.
A value in the range of 0 to 99.99 can be entered.
If automatic calculation is being selected for the component
height setup method, the electrode height is calculated
automatically while learning is performed.
5.
Specify the inflection points for a gull-wing lead.
When the positions of the inflection points are changed for any
electrode, those of other electrodes in the same group are also
changed.
Refer to "2.1.3 Image Display Area Operation" for the image
display area operation.
6.
Perform Step 1 for the remaining electrode groups, too.
7.
Click [Component Number Registration] after all the groups are
specified with the electrode information.
Chapter 2 Inspection Programming
2-74
To create a component number group based on this component
number, click [Create component number group]. A component
number group is created simultaneously with the component number
registration. Specify a component number group name.
Go to the Component Setting screen if there are any more
component numbers to register.
Repeat the component setting to electrode setting procedures for
the components to register.
When performing component number registration, windows are
automatically pasted to all components of the same component
number, and the component number status changes from
to .
When registration for all component numbers is complete, the screen moves
to the component registration screen.
2.4 Registering for Inspection
2-75
2.4.6 Setting Component Number Group
Component numbers with the same shape and color can be grouped into one to share images
and settings.
1.
On the menu bar in the editing screen, select [Tools] -> [Component
Number Group Setting].
In a component number group, all the windows, inspection settings, and color parameters are
the same except for mask model of component difference/polarity difference inspection.
Refer to "2.15.3 Editing a Model" for [Deploy].