Omron V-TS Teaching Manual.pdf.pdf - 第255页
Chapter 2 Insp ection Progr amming 2- 228 If an error is detected as a res ult of data verification, re cover the data based on the rec overy steps. Shown below is the data r ecover y flow: Check the recover y target and…
2.18 Inspection Program Maintenance
2-227
Shown below is the data verification flow:
① [Tool] - [Data Verification], or
automatic execution
④ Click the tab and check the
verification result
③ Viewing data verification result list
■ Data Verification Flow
Start
Data mismatched
Go to data recovery flow
② Data verification is performed (for
all component numbers)
User
v-TS
End
Chapter 2 Inspection Programming
2-228
If an error is detected as a result of data verification, recover the data based on the recovery
steps.
Shown below is the data recovery flow:
Check the recovery target and recovery step
message
Click [Update]
■ Data Recovery Flow
User
Recover and check based on the recovery steps
Recovery
successful
(Disappeared
from the list)
Recovery
unsuccessful
(Remains in
the list)
Contact OMRON
End
Start
3-1
Chapter
3 Management Menu
3.1 Opening Utility Menu ......................................................... 3-2
3.2 Checking Version Information ............................................ 3-3
3.3 Configuring Quality Criteria Setting ................................... 3-4
3.3.1 Opening Setup Screen .......................................... 3-4
3.3.2 Managing Criteria Rulebook ................................. 3-5
3.3.3 Configuring Electrode Type Inspection Criteria .... 3-7
3.3.4 Configuring Peripheral Inspection Criteria ............ 3-9
3.3.5 Configuring Component Unit Inspection Criteria .. 3-9
3.4 Managing Component Number Libraries ......................... 3-10
3.5 Setting Model Codes ....................................................... 3-21