Omron V-TS Teaching Manual.pdf.pdf - 第347页
P2 - 163 P3 - 10 P3 - 13 Description on the Reference Level Model was added. Description on the component body inspection criteria setup function was added. Description on the copy function of component number data was a…
Version History
The system you have just purchased may have new features or improvements. Changes will be
added to the manual as they occur. All versions have listed a version code that indicates the
version history and a version history section that indicates new changes and content.
About the Version Code
The manual's version code is marked in the bottom right corner of the cover following the
letters "No."
Version History
Version Code
Dates
Revisions
A
April 2014
First edition
B
May 2014
P2-113
P2-124
P2-125 to
127
Added the peripheral foreign object mask
Added description of the inspection by one character
Updated description of the mask model edit tool
C
August 2014
P2-47
P2-77
P2-80
P2-94
P2-137
P2-140
P2-143
P2-146
P2-155
Added description on component height setup
Added description on height learning
Added description on component information
confirmation/change
Added description on results confirmation
method
Added description on component lift inspection
tool
Added description on component number
setup deployment tool
Added description on orthographic view
Added description on height inspection to
logical expressions and inspection criteria
Added description on component number
replacement
D
September 2014
Overall
Overall
P9
P2-13
P2-43
P2-149
P2-165
Included VT-S500, VT-S720A, and VT-S730 as
applicable models of this manual
Added icons to description applicable to VT-S720A
or VT-S730 only
Added description on icons indicating S720A and
S730 in “How To Read This Manual” section
Added description on inter-system copy function
Added description on specified component saving
function
Added description on visual inspection result which
can be registered for each model
Added description on display method of images
selected by specified image saving function
E
March 2015
Overall
P2-102
P2-156
Typographical errors and description were
corrected.
Description on the secondary reflection
countermeasure function was added.
Description on the destination customization setup
function was added.
No
.
8 8 0 0 3 8 1 - 5
□
？？？？- ０□
Version Code
P2-163
P3-10
P3-13
Description on the Reference Level Model was
added.
Description on the component body inspection
criteria setup function was added.
Description on the copy function of component
number data was added.
F
October 2015
Overall
P2-12
P2-13
P2-21
P2-26
P2-34
P2-31
P2-48
P2-78
P2-85
P2-95
P2-96
P2-99
P2-97
P2-117
P2-126
P2-136
P2-153
P2-154
P2-173
P2-176
P2-190
P2-195
P2-198
Typographical errors, description, and image
display were corrected.
Component number list names: Description added
Description on the progress status of component
number teaching was changed.
Description on the emergence condition of multiple
window selection was added.
Position correction on a component block unit basis:
Description added
Description on the unlocking operation of inspection
program was added.
Section 2.4.6 “Component Number Group Setting”
was added to the flowchart.
Circuit name change for customer-specific program:
Description added
Description on height calculation was added.
Individual setting judgment for mass production
image: Description added
Criteria optimization: Description added
Description on the number of detected faults, the
number of actual faults, and overlooking was
added.
Upper/lower limits of wrong polarity/height: Added
Description on the detailed result dialog was added.
Wrong polarity/height: Added
Wrong polarity/height: Added
Model edit screen operation steps: Description of
⑮ Pin-by-Pin added
Wrong polarity/height inspection edit tool:
Description added
Wrong polarity/height: Added
Description on the enabling condition of the [Delete
Image] button was added.
Base plane model edit tool: Description added
Description on the import destination of component
ID was added.
Why oblique images are deleted when an
inspection program is copied was described.
Data verification for inspection program: Description
added
G
February 2016
P2-27
P2-47
P2-81
P2-83
P2-97
P2-138
P2-182
P2-186
P2-209
P2-213
Description on the operation of position correction
for each component block unit was added.
Description on the operation of the right/left and
upper/lower reverse buttons after the mount data
are read in was added.
Description on the reference face automatic
learning button was added.
Description on a function to set up height inspection
according to a component No.
The specification of PCB test when a bad mark is
detected was changed.
Description on the measured values of polarity
inspection was added.
Description on the deletion method of multiple PCB
images was added.
Description on the reference face model editing tool
was added.
Description on a function to output the content of an
inspection program list was added.
The specification was changed so that data are not
verified when a PCB test is performed.
P3-14
Appendix
Description on a function to output a list of the
component numbers used by inspection programs
was added.
Appendix 11. Description on PCB Test Result
Output Format was added.
H
April 2016
P2-79
P2-119
P2-122
Description on the software operation when a
component number model is registered and
destination PCB images are being selected was
added.
Description on the function by which destination can
be selected individually and released was added.
Description on the function by which destination can
be selected individually and inspection coverage
can be output was added.
I
August 2016
P2-6
P2-11
P2-13
P2-44
P2-125
P2-134
P2-136
P2-157
P2-160
P2-190
P2-201
P2-209
P3-12
Description on component number library was
changed.
Description on window was added.
Description on image display area and model list
was added.
Description on the function capable of keeping
description for each component number was added.
Description on the data separation of component
number description was added to the mount data
format definition function.
Description on inspection coverage was added.
Description on the list of feature parameters
adjustable in model editing was added.
Description on the common range of feature
parameters was added.
Description on the Deploy All Inspection Criteria
button was added.
Description on the Component Number Group
Settings Deployment tool was added.
Description on the screen position correction
method was added.
Description on the positon correction model editing
function was added.
The destination column and component number
group column were added to the list by the image
management job.
Description on the function capable of copying
component number group data among libraries was
added.