Omron V-TS Teaching Manual.pdf.pdf - 第115页
Chapter 2 Inspecti on Programm ing 2- 88 2.6.2 Criteria Se tting (Indivi dual Component) Inspection criteria can a lso be specified f or individual com ponents or windows ind ependentl y from the component num bers. In i…
2.6 Specifying Inspection Criteria
2-87
Refer to "2.15.3 Editing a Model" for the model editing procedure.
When setting judgment in combination of inspection result and/or
inspection of a component # or whole component # group with the
inspection result, click [Optimize]. The inspection criteria detail
setting screen appears. Set a Boolean expression as needed and
click [Apply].
Refer to “2.15.4 Optimizing Boolean Expressions and Inspection
Criterion Values” for setting procedure.
6.
Repeat Steps 2 to 5 for all the component numbers.
Refer to “2.15.3 Editing a Model” for deployment.
書式変更: フォント : 9 pt
削除
: Optimizing Boolean Expressions
and Inspection Criterion Values
Chapter 2 Inspection Programming
2-88
2.6.2 Criteria Setting (Individual Component)
Inspection criteria can also be specified for individual components or windows independently from
the component numbers.
In individual component criteria setting, each of land windows and electrode windows can be
specified individually.
1.
Select the [Criteria Setting (Individual Component)] tab to display
the Criteria Setting screen.
2.
Select the component for individual setting in the Inspection
Component List.
Switch between an Inspection PCB image and an
Unpopulated PCB image by clicking ON/OFF in the
check box.
Operation
2.6 Specifying Inspection Criteria
2-89
3.
Click the checkbox for the window for individual setting.
is displayed in the box and the window is locked.
The editing of the inspection criteria for the locked window is
enabled. At the same time, the editing of the same window is
disabled on the Component Number Criteria Setting screen.
is also displayed for the locked window in the Inspection
Component List.
To unlock the window, click in the Window Composition list.
The lock release confirmation dialog appears. Click [OK] to cancel
the individual setting and unlock the window. The global criteria for
the component number is applied for the unlocked window.
4.
Specify inspection criteria for the window.
Refer to Step 4 of "2.6.1 Criteria Setting (Product No.)" for the
setting procedure.