Omron V-TS Teaching Manual.pdf.pdf - 第51页
Chapter 2 Inspection Programm ing 2- 24 Window A d justment Dialog 1. Click (W indow Adjustm ent Dialog) button in the Im age Operation tool bar. (Us er operations b ecom e effective when a window on the im age is sele…
2.1 Basics of Teaching
2-23
<Select in Window Composition List>
1.
Open the [Criteria Setting] screen.
2.
Right-click the [Component Number] row in the window composition
list. To select electrode group windows, right-click the [Electrode
Group] row.
3.
Clicking [Select Lower Window] can select all the windows at lower
levels.
Specific windows can be deselected or added to selection by
clicking them while holding down the [Ctrl] key.
To select consecutive windows simultaneously, click the first
window and then the last one while holding down the [Shift]
key.
Chapter 2 Inspection Programming
2-24
Window Adjustment Dialog
1.
Click (Window Adjustment Dialog) button in the Image
Operation tool bar. (User operations become effective when a
window on the image is selected.)
2.
The window adjustment dialog appears.
3.
Click (Select Window) button in the Image Operation tool bar
and click to select the window to adjust.
4.
Click [Move] and the direction button (e.g. ) to move the window.
To resize the window, click the operating point square and the
direction button (e.g. ) corresponding to the direction in which the
window is resized.
Select the window adjustment mode.
[Move]…Select the Move mode.
Any Square…Select the operating point
to resize the window.
Move or resize the window in the
arrow direction.
For window resizing, only enabled
buttons determined by the selected
operating point can be used.
The center coordinates and size
of the window are displayed.
Rotate the window counterclockwise by
90 degree increment or the specified
degrees.
Operation
2.2 Creating a New Inspection Program
2-25
2.2 Creating a New Inspection Program
This section describes the procedure to create a new inspection program.
1.
Click [Teaching] in the main menu.
2.
The Select PCB screen appears.
To create an inspection program for a new PCB, click [New PCB].