Omron V-TS Teaching Manual.pdf.pdf - 第104页
2.4 Registeri ng f or Insp ection 2- 77 2.4.6.2 Adding to Com ponent Number Group An existing com ponent num ber is added to a compon ent number group. 1. Select a component t ype. Select a component t ype from the [Comp…
Chapter 2 Inspection Programming
2-76
2.4.6.1 Create New Component Number Group
A new component number group is created based on an existing component number.
1.
Select a component type.
Select a component type from the [Component Type] pull-down
menu.
2.
Select a component number.
Only the same component numbers as the selected
component type are displayed in the list.
Select the [Show component number not belonging to group] check box,
and select a component number for which you want to create a
group.
3.
Create a new component number group.
Click [Create New Group] at the screen bottom. The component
number group name dialog box appears. Enter a component number
group name.
You cannot specify the same component number group name
in one component type.
2.4 Registering for Inspection
2-77
2.4.6.2 Adding to Component Number Group
An existing component number is added to a component number group.
1.
Select a component type.
Select a component type from the [Component Type] pull-down
menu.
2.
Select a component number group.
3.
Select a component number.
Select the [Show component number not belonging to group] check
box, and select a component number you want to add to the
selected component number group.
By clicking [Change View], the display of component number can be
toggled between image and thumbnail.
4.
Add to the component number group.
Click [Add to Group] to add the component number to the
component number group.
When added to the group, data of the component number is
synchronized with the component number group. Be careful
that this may change the inspection result.
If a component size of the component number you want to add
differs from the component size of the component number
group, you cannot add the component number to the group. In
such a case, either create a new component number group or
correct the component window size.
Chapter 2 Inspection Programming
2-78
2.4.6.3 Deleting from Component Number Group
A component number is deleted from a component number group.
1.
Select a component type.
Select a component type from the [Component Type] pull-down
menu.
2.
Select a component number group.
3.
Select a component number.
Unselect the [Display component number not belonging to group]
check box, and select a component number you want to delete from
the selected component number group to which the component
number belongs.
4.
Delete from the component number group.
Click [Delete from Group] to delete the component number from the
component number group.
When a component number is deleted from a component
number group, the setting of the component number group is
succeeded to the component number. Be careful that the
original setting of the component number before being added
to the group is not restored.
A component number registered 1st to the component number
group cannot be deleted from the group. To delete the 1st
registered component number, delete the group first then
create and register the group again.