Omron V-TS Teaching Manual.pdf.pdf - 第4页
3 Read and Unders tand this Manual Please read and und erstand this manual before u sing the products. Please consult your OMRON representative if you have any questions or c omm ents. W arranty and Limitations of Liabil…
2
PCB Inspection System
Teaching Manual
Before You
Begin
Before You Begin, Table of Contents
Chapter 1
Before Getting Started
Chapter 2
Inspection Programming
Chapter 3
Management Menu
Appendix
Teaching Flow
3
Read and Understand this Manual
Please read and understand this manual before using the products. Please consult your
OMRON representative if you have any questions or comments.
Warranty and Limitations of Liability
The ordering or use of Omron products implies your agreement to the Terms and
Conditions described below, unless otherwise is specifically agreed.
1. Definition
The definitions used in these Terms and Conditions are as follows:
(1) Omron products: Omron branded automated optical inspection (AOI) machine
and peripheral software to be used with Omron branded AOI machine
(2) Catalogues: Introduction brochure of products, specifications, instructions and
manuals of Omron products, including electronically provided information
available on the Omron electronic components information website, etc.
(3) Usage conditions: Usage conditions, rating, performance, operating
environment, handling instructions, cautions, prohibited use, etc. of Omron
products described in specifications, documentations or manuals.
(4) Customer application: Application of Omron products by customers which using
Omron products as equipments or system components.
(5) Fitness: (a)Fitness, (b)performance, (c) non-infringement of third-party
intellectual property, (d) compliance with laws and regulations and (e)conformity
to various standards.
2. Caution on Descriptions Using Catalogues
Attention is required to the following points for information obtained from
Catalogues:
(1) Rated values and performance values are the product of tests performed for
separate single conditions, including but not limited to temperature and
humidity. Omron does not warrant rated values and performance values for
multiple combined conditions.
(2) Reference data are provided for reference only. Omron does NOT warrant that
Omron products work properly at all times in the range of reference data.
(3) Application examples are provided for reference only. Omron does NOT warrant
the Fitness of Omron products under such applications.
(4) Omron may discontinue the production of Omron products or change the
specifications of them for the purpose of improving such products or other
reasons entirely at its own discretion.
3. Precautions
Please be aware of and accept the following when you introduce or use Omron
products:
(1) Please use Omron products in compliance with usage conditions including
rating and performance limits.
(2) Please confirm the fitness of Omron products in your application and use your
own judgment to determine the appropriateness of using them in such
application. Omron shall not warrant the fitness of Omron products in customer
applications.
(3) Please confirm that Omron products are properly wired and installed for their
intended use in your overall system.
(4) When using Omron products, please make sure to conduct regular maintenance
on Omron products.
(5) Omron products are designed and manufactured as general-purpose AOI and
peripheral software for using in SMT Line. If you are using Omron products in the
4
applications except SMT, Omron shall not provide any warranty for such Omron
products, unless otherwise specifically agreed or unless the applications are
intended by Omron.
(6) When using inspection program and library by more than one AOI machine, the
result is sometimes different between each AOI machine. Before using AOI
machine, please confirm inspection results between more than one AOI
machines are equal each other. If necessary, please tune the parameters of each
inspection program and other conditions.
4. Warranty Terms and Conditions
The terms and conditions for warranty of Omron products are as follows:
(1) Warranty period: Omron warrants that products shall be free of material defects
and or workmanship for a period of one year after the date of purchase or the
date when installed at the specified location.
(Excepting in the case where there is additional description in Catalogues)
(2) Coverage: Omron, at its own discretion, will provide one of the following two
services for malfunctioning Omron products:
(a) Free repair of the malfunctioning Omron products at an Omron maintenance
service location.
(No repair support is available for electronic components)
(b) Free replacement of the malfunctioning Omron products with the same
number of replacement/alternative products.
(3) Exceptions: Omron will not cover Omron products (including the data such as
inspection programs are corrupted.) under its warranty if the cause of the
malfunction falls under any of the following.
(a) Usage in a manner other than the original intended use for the Omron
products.
(b) Usage outside of the usage conditions.
(c) Usage of the product against the conditions described in "3. NOTE ABOUT
USE"
(d) Modification or repair made to the Omron product by other than Omron
personnel.
(e) Software program embedded by other than Omron or usage of such software.
(f) Cause which could not have been foreseen with the level of science and
technology at the time of shipping from Omron.
(g) Causes originating from other than Omron or Omron products (including
causes such as, but not limited to, natural disasters).
5. Limitation of Liability
The warranty set out in these Terms and Conditions is the whole and sole liability for
Omron products.
There are no other warranties, expressed or implied. Omron and the distributors of
Omron products are not liable for any damages which may arise from or be related to
Omron products.
6. Export Controls
Customers of Omron products shall comply with all applicable laws and regulations
of Japan and/or other relevant countries with regard to security export control, when
exporting Omron products and/or technical documents or providing such products
and/or documents to a non-resident. Omron may not provide customers with
Omron products and/or technical documents should they fail to comply with such
laws and regulations.