MR8740、MR8741_user_manual_eng_20191016H.pdf - 第150页
7.1 Adding Comments 138 This section explains how t o enter title comments and ch annel comments. Information about alphanumeric input is also provide d. When you enter a title comment, it can be displayed at the top of …
137
6
Chapter 7 Utility Functions
7
Various utility functions are described in the section.
Utility Functions Chapter 7
Adding Comments (p.138)
Applicable measurements and settings
• Displaying Waveforms During Recording
(p.145)
• Overlaying with past recorded waveforms
(p.146)
Utility Functions
Converting input values (Scaling) (p.148)
Detailed module settings (p.161)
• Making anti-aliasing filter settings
• Selecting the thermocouple type
• Making reference point compensation settings
• Making wire break detection settings
• Making data updating settings
• Executing auto balance
• Making probe attenuation settings
• Making response settings
• Making measurement mode settings
Copying a setting to another channel(p.160)
Fine Adjustment of Input Values (p.158)
Inverting a waveform (p.159)
Setting the waveform display freely(p.155)
7.1 Adding Comments
138
This section explains how to enter title comments and channel comments.
Information about alphanumeric input is also provided.
When you enter a title comment, it can be displayed at the top of the Waveform screen. (Allowed
number of characters: up to 40)
7.1 Adding Comments
7.1.1 Adding a Title Comment
1
Procedure
To open the screen: Right-click and select [CHAN] [Comment] sheet
1
Enter a title comment.
Select
Move the flashing cursor to the [Title Com-
ment] item, and then click.
Input Enter comment text.
See: "Entering Text" (p.141)
Clear
Clear entered information
Undo
Return to condition of preceding step
To select from preset terms
Clicking [PRESET] after activating text input brings up a list of preset terms.
It is also possible to select words from previously entered titles (History func-
tion).
See: "Entering Text From a Term List Or History List" (p.142)
7.1 Adding Comments
139
6
Chapter 7 Utility Functions
7
Comments added for each channel can be displayed on-screen. (Allowed number of characters: up
to 40)
7.1.2 Adding a Channel Comment
To display a comment on the screen
Right-click and select [DISP] , and then select a comment.
See: "6.7.2 Showing Comments On Waveform Screen" (p.134)
To copy a comment to another channel
The [Comment] sheet can be used to copy a comment.
See: "7.8 Copying settings to other channels (calculation No.) (Copy function)" (p.160)
1
Procedure
To open the screen: Right-click and select [CHAN] [Comment] sheet
1
Enter the comment for each analog chan-
nel.
Select
Move the flashing cursor to the [Comment]
item, and then click.
Input Enter comment text.
See: "Entering Text" (p.141)
Clear
Clear entered information
Undo
Return to condition of preceding step
To select from preset terms
Clicking [PRESET] after activating text input brings up a list of preset terms.
It is also possible to select words from previously entered titles (History func-
tion).
See: "Entering Text From a Term List Or History List" (p.142)