MR8740、MR8741_user_manual_eng_20191016H.pdf - 第321页
309 11 Chapter 14 System Environme nt Settings 13 14 Use the System screen - [Environment] shee t to make system-related settings. System Environment Settings Cha pter 14 See: " Chapter 16 External Control (MR8741 O…
13.6 Editor Command Details
308
309
11
Chapter 14 System Environment Settings
13
14
Use the System screen - [Environment] sheet to make system-related settings.
System Environment
Settings Chapter 14
See: "Chapter 16 External Control (MR8741 Only)" (p.335)
Opening the [Environment] sheet
Select [SYSTEM] and
then [Environment] from
the right-click menu.
MR8740
MR8741
310
Setting Descriptions____________________________________________
Grid Select the grid (graticule) type for the waveform screen.
Time Value Display the time from the trigger point on the display.
• During external sampling, the number of points is fixed.
• These settings affect the values read at the A/B cursors.
Start Backup Preserves measurement condition settings. If a power outage occurs while
recording, it resumes automatically when power is restored. When triggering is
enabled, the awaiting-trigger state is activated.
• Valid only during recording.
• This function does not start automatically when the instrument is turned on.
Display Color Screen background and character colors on the Waveform screen can be set as
desired. Select [Color Edit] change the [R] (red), [G] (green) and [B] (blue) values
of each item to change its color.
( p.312)
Beep Sound This function audibly indicates warnings and operating conditions by beep
sounds.
Off No grid displayed.
Dotted Line
Display a dotted-line grid. (default setting)
Solid Line
Display a solid-line grid.
Time Display the time from the trigger point (fixed units). (default setting)
Time (60)
Display the time from the trigger point (sexagesimal (base-60) system).
div
Display the number of divisions (div) from the trigger point.
Date
Display time of waveform acquisition.
Sample Num
Display the number of data points from the trigger point.
Off (default setting) / On
Color 1 / Color 2 / Color 3 / Color Edit
Off Beep sounds are disabled.
Warning
Beeps sound for error messages (warning displays) and upon NG (fail) judg-
ments. (default setting)
Warn+Act
In addition to the warning beeps above, beeps sound to indicate start, trigger,
stop and auto-save-finish.