MR8740、MR8741_user_manual_eng_20191016H.pdf - 第191页

7.9 Setting Details of Modules 179 6 Chapter 7 Utility Functions 7 Channels ins talled with Model MR 8791 cannot be me asured. See: "Opening the [Each Ch] sheet, Making a Channel Sele ction" (p.161) Mode Select…

100%1 / 428
7.9 Setting Details of Modules
178
When Off Sets the output terminal status when the output is OFF.
Select
Output Turns waveform output On/Off.
Select
Control Sets the waveform output.
Select
Method Selects the control method for waveform output.
Select
For details, see the instruction manual of Models U8793, MR8790, and
MR8791.
Selections Description
Open
Opens the output terminals, separating them from internal circuits.
Short
Short-circuits the output terminals, separating them from internal
circuits.
Selections Description
On
Outputs waveform.
Off
Does not output the waveform.
Selections Description
RUN
Starts output.
PAUSE
Pauses output. While output is paused, the output at the time
[PAUSE] was pressed will be output.
STOP
Stops output.
Selections Description
Manual
Restricts control of signal output to Signal Generation screen.
Sync.
Augments manual control with signal output in synchronization with
the start and end of measurement.
START key: Starts output when measurement starts.
STOP key: Stops output when measurement stops
Keys
Augments manual control by allowing signal output to be manipu-
lated using the instrument’s keys.
START key:Starts output.
STOP key: Stops output.
Manual Trigger key: Pauses output.
7.9 Setting Details of Modules
179
6
Chapter 7 Utility Functions
7
Channels installed with Model MR8791 cannot be measured.
See: "Opening the [Each Ch] sheet, Making a Channel Selection" (p.161)
Mode Select the type of output.
Select
Refer to the instruction manual of Models U8793, MR8790, and MR8791 regard-
ing the detailed settings for pattern output.
Frequency Sets the frequency for pulse output.
Duty Sets the pulse duty.
Out-Config Sets the output status.
Select
7.9.12 Setting Model MR 8971 Pulse Generator Unit
Selections Description
Pulse
Pulse output (Default settings)
Pattern
Pattern output
0 Hz to 20000 Hz
0% to 100%
Selections Description
TTL
TTL output
OC
Open collector output
7.9 Setting Details of Modules
180
Output Turns waveform output On/Off.
Select
Control Sets the waveform output.
Select
Method Selects the control method for waveform output.
Select
For details, see the instruction manual of Models U8793, MR8790, and MR8791.
Selections Description
On
Outputs waveform.
Off
Does not output the waveform.
Selections Description
RUN
Starts output.
PAUSE
Pauses output. While output is paused, the output at the time
[PAUSE] was pressed will be output.
STOP
Stops output.
Selections Description
Manual
Restricts control of signal output to Signal Generation screen.
Sync.
Augments manual control with signal output in synchronization with
the start and end of measurement.
START key: Starts output when measurement starts.
STOP key: Stops output when measurement stops.
Sync.
Augments manual control by allowing signal output to be manipu-
lated using the instrument’s keys.
START key: Starts output.
STOP key: Stops output.
Manual Trigger key: Pauses output.