KJ-01.02.Instruction Manual.REV.02.pdf - 第10页

V Grea sing 1. Regarding greasing, use Albania Grease. 2. To prevent the occurrence of an inflammation or rash, immediately wash the related portions if grease adheres to your eyes or other parts of your body. 3. If grea…

To turn off power supply means to turn off a

power supply switch and then to draw out a

power plug from a receptacle or to separate

the power cable from the supply side.

Hereinafter the same.

Situations in Which It Is Necessary to Turn Off Power Supply

1. In the case of an abnormality or an accident, or in the event of power failure,

immediately turn off power supply.

2. In order to prevent accidents due to unintended start-up of the machine, carry out

inspection, repair, or cleaning of the machine only after turning off power supply.

3. When drawing out the power supply plug, do it by holding the plug itself, not the

cord.

Matters of Caution at Each of Its Use Stages

Transport

1. When lifting the machine or moving it, take sufficient safety measures so that no

dropping accidents will occur.

Unpacking

1. Read all instructions shown on the transport-use container.

2. Never cut tapes with a cutter.

3. Retain delivery-use materials.

Installation

1. To prevent the occurrence of any accident due to unintended moving of the

machine in operation, make casters float using a height adjuster.

2. Install this machine at a flat position.

3. To prevent the occurrence of electric shock, power leakage, or fires, use attached

products regarding cables, and link them to the specified positions.

4. To prevent electric shock, power leakage, or fires, make sure that irrational force

will be applied to the cables while the machine is in operation.

5. Securely fix the power supply plug and the connector of an I/F cable. When

drawing out the power supply plug or the I/F cable, do it by holding the connector

unit.

Before Operation

1. To prevent accidents to human bodies, make sure before supplying power that

there is no damage, coming off of parts, or loosening of connectors and cables.

2. To prevent bodily accidents, never put in your hand into the driving unit.

CAUTION

Greasing

1. Regarding greasing, use Albania Grease.

2. To prevent the occurrence of an inflammation or rash, immediately wash the

related portions if grease adheres to your eyes or other parts of your body.

3. If grease is mistakenly swallowed, immediately consult a physician to prevent

diarrhea or vomiting.

Maintenance

1. To prevent accidents due to unaccustomedness, repair and adjustment shall be

conducted by maintenance engineers who are versed in the machine. In replacing

parts, use genuine parts of our company. We will not assume any responsibility

for an accident due to the use of non-genuine parts.

2. To prevent accidents or electric shock due to unaccustomedness, entrust electrical

repair or maintenance work (including wiring work) to persons versed in electricity,

or ask engineers of our company or its sales company to do it.

3. To prevent accidents due to unintended start-up of the machine, conduct repair or

adjustment only after removing air supply pipes and discharging residual air.

4. To prevent bodily accidents, confirm after such work as repair, adjustment, or parts

replacement that no screws or nuts are loosened.

Use Environment

1. Use the machine in the environment free from effects of noise sources (magnetic

waves), such as high-frequency welders, in order to prevent accidents due to

erroneous actions.

2. In order to prevent accidents due to erroneous actions, use the machine in the

environment where source voltage surpasses 200V (220V, 240V)± 10%.

3. In order to prevent accidents due to erroneous actions, do not use the machine in

the environment where the supplied air pressure is 0.5 to 1.0MPa.

4. To ensure safety, use the machine under the following environment:

Ambient temperature during operation + 10°C - +35°C

Relative humidity during operation 50% or less (35°C)

90% or less (20°C)

5. To prevent accidents due to breakdown of electric/electronic parts, turn on power

supply sufficiently after the fear of dew condensation is eliminated, because such

condensation may occur when the machine is rapidly moved from a cold place to a

warm location.

6. To prevent accidents due to breakdown of electric/electronic parts, stop the use of

the machine during lightning, and draw out the power supply plug.

CAUTION

Matters of Caution for Safe Use of

KJ-01/02

DANGER

1. To prevent accidents due to electric shock, do not open the

electrical equipment box while power supply is on.

2. To prevent electric shock, do not operate the machine, with the

grounding line unlinked.

CAUTION

1. To prevent damage to human bodies, do not operate the

machine, with the safety cover or equipment removed.

2. To prevent damage to human bodies, make sure that hair,

clothes, etc., will not be caught by the conveyor chain.

Also, keep off gloves.

3. To prevent damage to human bodies, turn off power supply

during maintenance (greasing, adjustment, and daily inspection).

4. To prevent damage to human bodies, use an earth leakage

breaker for the power line.