KJ-01.02.Instruction Manual.REV.02.pdf - 第331页
10 − 6 Figure 10.3. 7 Others menu Figure 10.3.8 Exi t menu “6/Otherr” menu “9/Exit” menu
10 − 5
Figure 10.3.5 Laser menu
Figure 10.3.6 Vision menu
“4/Laser” menu
“5/Vision” menu
10 − 6
Figure 10.3.7 Others menu
Figure 10.3.8 Exit menu
“6/Otherr” menu
“9/Exit” menu
10 − 7
10.4 Operations
10.4.1 Moving the axes
10.4.1.1 Moving the XY-axis
When you select the [1/Axis move] on the menu bar, then the [1/XY axis] command
on the displayed menu, the command menu appears as shown in Figure 10.4.1.1.1.
Selecting the desired command from this command menu has the machine start
controlling the corresponding device.
CAUTION
The XY-axis starts moving immediately after you select a command.
To avoid risk of injury, do not place your hand in the machine, nor
move your face or head close to the machine during operation.
Before selecting a command, check to see if there is no one who is
working the internal parts of the machine.
Before selecting a command, check to see if there is no one who is
near the machine and can be injured when the machine warms up.
Before selecting a command, check to see there is no obstacle (tools
and jigs) attached or left in the machine that may prevent any part
inside the machine from operating.
Figure 10.4.1.1.1 Axis (XY-axis) control menu