KJ-01.02.Instruction Manual.REV.02.pdf - 第8页

III Matters of Caution Regarding Safety To prevent acciden ts due to electric shock, turn off power supply if it is necessary to open the electrical equipment box. For added precaution, open the lid of the box only after…

It symbolizes a contact to a

grounding wire.

It indicates the direction of turn.

III

Matters of Caution Regarding Safety

To prevent accidents due to electric shock, turn off power supply if it is necessary to

open the electrical equipment box. For added precaution, open the lid of the box only

after a lapse of more than five minutes.

Basic Matters of Precaution

1. Be sure to read all documents included in this Manual and the attached booklet

before using this machine. Also, keep this Manual carefully so as to be able to read

it whenever necessary.

2. Contents of this Manual include items that are not included in specifications of the

machine purchased.

3. The machine should be operated only by the operator who has learned how to run it.

4. Regarding the repair or maintenance (excluding daily inspection and other matters

specified in the Manual), ask our company or its agent to do it.

5. General maintenance, inspection, and repair (matters specified in this Manual) shall

be conducted only by specialized maintenance engineers who have finished the

maintenance course specified by our company.

With regard to repair (matters specified in this Manual), use genuine parts of our

company.

Safety Equipment, Alarm Label

1. In order to prevent accidents due to nonpresence of safety equipment, start to

operate this machine only after confirming that the equipment is suitably installed at

the specified position.

2. If the safety equipment is dismantled, be sure to attach it to its original position, and

confirm that it operates normally.

3. Make sure that the warning label stuck to the machine will be always clearly visible.

If it has been peeled off or stained, order new labels from our company and

exchange old labels with new ones.

Application

1. Never use this machine for purposes other than its original application.

Our company will not be responsible in the case of its use for other application.

2. Do not remodel this machine. Our company will not be responsible for any

accident arising as a result of its remodeling.

Operational Training

1. To prevent accidents due to unaccustomed handling, operation of this machine

must be limited to operators who have participated in the operation training

specified by our company and have appropriate knowledge and operating skills.

DANGER

CAUTION

To turn off power supply means to turn off a

power supply switch and then to draw out a

power plug from a receptacle or to separate

the power cable from the supply side.

Hereinafter the same.

Situations in Which It Is Necessary to Turn Off Power Supply

1. In the case of an abnormality or an accident, or in the event of power failure,

immediately turn off power supply.

2. In order to prevent accidents due to unintended start-up of the machine, carry out

inspection, repair, or cleaning of the machine only after turning off power supply.

3. When drawing out the power supply plug, do it by holding the plug itself, not the

cord.

Matters of Caution at Each of Its Use Stages

Transport

1. When lifting the machine or moving it, take sufficient safety measures so that no

dropping accidents will occur.

Unpacking

1. Read all instructions shown on the transport-use container.

2. Never cut tapes with a cutter.

3. Retain delivery-use materials.

Installation

1. To prevent the occurrence of any accident due to unintended moving of the

machine in operation, make casters float using a height adjuster.

2. Install this machine at a flat position.

3. To prevent the occurrence of electric shock, power leakage, or fires, use attached

products regarding cables, and link them to the specified positions.

4. To prevent electric shock, power leakage, or fires, make sure that irrational force

will be applied to the cables while the machine is in operation.

5. Securely fix the power supply plug and the connector of an I/F cable. When

drawing out the power supply plug or the I/F cable, do it by holding the connector

unit.

Before Operation

1. To prevent accidents to human bodies, make sure before supplying power that

there is no damage, coming off of parts, or loosening of connectors and cables.

2. To prevent bodily accidents, never put in your hand into the driving unit.

CAUTION