KJ-01.02.Instruction Manual.REV.02.pdf - 第375页
14 − 6 14.2.5 Transport belt Check that the belt is severely worn-out, dam aged, or stretc hed. If it is necessary to replace the belt , f ollow the procedure below . 1) Loosen all screw and nut of the t ransport pulley …
14 − 5
14.2.4 Air filter (Head)
1) Loosen the screw ② fixing the Z slide shaft ① to pull out the nozzle outer
shaft ③.
2) Check to see if there is any contamination of the filter ④.
3) If any, remove the filter ④ from the nozzle outer shaft, the replace it with a new
one.
4) Push the nozzle outer shaft ③ into the Z slide shaft ①, then fix it with the
screw ②.
Filter ④: Part number E3014727000
CAUTION
To prevent the body from injury which can be caused by accidental
activation of the machine, turn off the power of the machine before
following the operation above.
14 − 6
14.2.5 Transport belt
Check that the belt is severely worn-out, damaged, or stretched. If it is necessary
to replace the belt, follow the procedure below.
1) Loosen all screw and nut of the transport pulley as shown in Figure 13.2.5.1 to
loosen tension of the belt.
2) Loosen the flush bolts of the PWB transport belt as shown in Figure 13.2.5.1 to
remove the PWB transport belt guides. At this point, you can remove/attach
the PWB transport belt.
Figure 14.2.5.1
CAUTION
To prevent the body from injury which can be caused by accidental
activation of the machine, turn off the power of the machine before
following the operation above.
PWB transport belt guides
Transport pulley
14 − 7
14.2.6 Transport pulley
Check that the pulley turns without resistance.
If it is necessary to replace the pulley, follow the procedure below.
(1) Transfer pulley replacement
1) As shown in Figures 14.2.6.1, the transport pulleys are fixed at the front
and rear rail plates. Loosen the screws used to fix the pulleys to replace
them.
2) The same as for the transport belt replacement, perform tension
adjustment of the transport belt.
Figures 14.2.6.1
CAUTION
To prevent the body from injury which can be caused by accidental
activation of the machine, turn off the power of the machine before
following the operation above.
PWB transport rail
Screw (pan-headed screw)
Transport pulley
Screw (pan-headed screw)
Transport pulley
Pulley stopper
Screw (pan-headed screw)
Transport pulley
Flat washer
Rail guide
Flange nuts