KJ-01.02.Instruction Manual.REV.02.pdf - 第72页
4 − 1 CHA PTER 4 SETUP The setup menu scr een, as shown in Figure 4.1, appears when [4/ Setup] is select ed f rom the menu bar . Figure 4.1 Setup menu screen T able 4.1 Setup commands No. Command Character s display ed o…
3 − 14
(2) Program edit local menu
(3) Production local menu
1/File 2/Edit 3/Chng(F6) 4/Dspl.(F9) 5/Cnvr 6/Meas. 9/Exit
1/Open...
2/Save
3/New...
4/Save as...
9/Exit
1/Copy F3
2/Delete F4
3/Move F5
4/Insert
5/Duplicate
6/Jump
7/Find
8/Vision copy
9/Nozzle sort
A/Component name
B/Pick point recalc
C/Mark database
1/PWB load
2/PWB eject
3/BOC align
1/PWB data
2/Placement data
3/Component data
4/Pickup data
5/Vision data
6/Data compl. state
1/Component form
2/Component list
3/Pick input
4/Feeder order
1/Current comp.
1/File 2/Production mode 3/Conversion data 4/Option 9/Exit
1/Open...
2/Save
3/Save as...
9/Exit
1/PWB prod.
2/Trial
3/Dry run
9/Exit
1/Parts No. set up
2/Management info.
1/Option
1/Select expression 2/Clear 9/Exit
1/Total
2/Front
3/Rear
4/Tray holder
1/Clear 9/Exit
1/Supply select 2/Parts supply 9/Exit
1/Front
2/Rear
3/Tray holder
1/Replenish component
2/Replenish all feeders
3/Update display
9/Exit
4 − 1
CHAPTER 4 SETUP
The setup menu screen, as shown in Figure 4.1, appears when [4/ Setup] is selected from
the menu bar.
Figure 4.1 Setup menu screen
Table 4.1 Setup commands
No. Command Characters displayed on the message line
1 Units of measure Sets the unit system for length and pressure.
2 Opn. option Sets the options for operation.
3 Machine setup Sets the machine setup status.
4 Manual control Carries out a test for devices in manual operation.
See CHAPTER 10 “MANUAL CONTROL” for [4/ Manual control].
* The data of the screen shown here are only for your reference and it is for the
machine which is front-reference and right-to-left-transportation type.
4 − 2
4.1 Unit System
Table 4.1.1 Unit system setting items
No. Units of measure Description
1 Length Setting of unit of length, and decimal point
2 Pressure Setting of unit of pressure, and decimal point
A screen as shown in Figure 4.1.1 appears when [1/ Units of measure] is
selected from [4/ Setup].
Figure 4.1.1 Units of measure screen
(1) Operation
Select the units of length and pressure with a radio button.
When the “OK” button is pressed after selections have been made, the settings
are stored in machine’s flash memory.
- Unit conversion table - Screen display (common to X, Y, Z)
mm 1/100mm inch
1 100 0.03937
0.01 1 0.0003937
25.4 2540 1
Length
0.0254 2.54 0.001
Level kPa
1 0.1333
Pressure
7.5 1
(2) Effects
All figures appear with the units set here.
Input values are also read with the units set here.
mm 1/100mm inch
Display
123.45 12345 12.123
mm 1/100mm
Display
123.12 12.123