KJ-01.02.Instruction Manual.REV.02.pdf - 第250页
6 − 46 6.6 Menu commands The f ollowing table lists t he menu commands available f rom t he Pickup dat a editing T able 6.4.3.1 Pickup data menu comm ands 1/File 2/Edit 3/C hng 4/Dspl 5/Cnvr 6/M eas. 9/Exit 1/Open... 2/S…
6 − 45
(5) Loading another pattern
This function copies the pattern data already created and stored in another
area, then automatically adjusts its size according the specified size to load it.
Figure 6.5.4.4.3 Loading another pattern
6 − 46
6.6 Menu commands
The following table lists the menu commands available from the Pickup data editing
Table 6.4.3.1
Pickup
data menu commands
1/File
2/Edit 3/Chng 4/Dspl 5/Cnvr 6/Meas. 9/Exit
1/Open...
2/Save
3/New...
4/Save as...
9/Exit
○
○
○
○
○
1/Copy 2/Delete
2/Delate
3/Move
4/Insert
5/Duplicate
6/Jump
7/Find
8/Vision copy
9/Nozzle sort
A/Component name
B/Pick point recalc
C/Mark database
×
×
×
×
×
×
×
×
×
×
×
×
1/PWB data
2/Placement data
3/Component data
4/Pickup data
5/Vision data
6/Data compl. state
○
△
△
×
○
○
1/Component form
2/Component list
3/Pick input
4/Feeder order
5/ Vision List
6/ Vision Form
×
×
×
×
△
△
1/PWB load
2/PWB eject
3/BOC align
○
○
○
1/Single
measurement
×
9/Exit
○
○: Available △: Available dependent on conditions ×: Unavailable
6.6.1 File menu
The same as the PWB data.
6.6.2 Edit menu
No command is available.
6.6.3 Chng (Change) menu
The operation is the same as that for “Data change” of PWB data.
6.6.4 Dspl. (Display) menu
No command is available.
6.6.5 Cnvr. (Conveyor) menu
This command loads and unloads the PWBs.
The operation is the same as that for “PWB transport” of PWB data.
6.6.6 Meas. (Measurement)
No command is available.
6.6.7 Exit
The same as the production end.
7 − 1
CHAPTER 7 TEACHING
7.1 Functions
There are two types of teaching; one is for coordinates and the other for recognition.
(1) Coordinates teaching
① Taught devices and teaching items
T he device names which can be taught and the teaching items are shown
below. Note that the device names which are options and not installed and
those designated as “Not to be used” for the machine setup cannot be
selected.
Table 7.1.1 KJ-01/02 teaching device and teaching item
Teaching device
Teaching coordinates (
○
)
X/Y coordinates Z coordinates
θ coordinates
Vacuum pressure
Mark recognition
parameter
LA head
○ ○ ○ ○
LAIC head
○
K
○ ○
Bad mark sensor
○
OCC camera
○
○
OCC2 camera
○
HMS
○
The POINT SEL key of the HOD is used to teach two points, and is enabled when you
select the camera and bad mark sensor as the teaching device. Note that this key is
appropriate to use a camera to teach a point. The 1POINT key is used by default
when you select a teaching device.
If you select another teaching device while the machine is teaching coordinates, the
device newly selected moves to the coordinates that the current device points to.
This allows you to change the teaching device.