KJ-01.02.Instruction Manual.REV.02.pdf - 第399页
3 E0310 Production data will be lost. Continue ? Y ou tried to load another file to the machine although you changed the current production program and have not saved it yet. W hen you click the <Y es> button, the …
2
E0104 Can not copy to same directory. You cannot perform any “copy” operation if the copy source
directory is the same as the copy destination directory.
Change the copy destination directory to copy data.
W0106 No file was found. This error message appears on the screen when you click
the <Check
> button although no file is displayed in the file list
box.
Change the current directory to another one, and click the
<Check
> box only after files appear in the file list box.
W0110 File '%s' exists in
destination.Overwrite?
There is already a file “fileName”, which you selected during
copy operation, on the copy destination. If you want to
overwrite the existing file, click the <Yes> button.
Otherwise, click the <No> button.
E0111 File '%s' exists. Can not rename. Since the file “FileName”, which you specify during file
renaming operation, already exists, you cannot rename the
specified file.
E0112 New file name is not specified. You have not specified a new file name yet to rename the file.
Enter a new file name.
W0200 File ”FileName” exists.
Overwrite?
A file already exists whose name is the same as “FileName”,
which you specify to save the current file as another name.
When you click the <Yes> button, the existing file is
overwritten with the specified file. When clicking the <No>
button, the save process is cancelled.
E0201 Disk full. There is no memory space for saving a file or saving a file as
another file.
Delete unnecessary files or save it onto another drive.
E0203 File write error. <##[message]> A file writing error occurs while the machine is saving a file.
This error message appears on the screen when the disk is
damaged.
If you are using a floppy disk, replace it with a new one. If
using a silicone disk, let us know the number displayed on
the screen.
E0208 File name is not correct. The new file name you specified to save the current file as
another file is incorrect. Check the entered name, and enter
a correct name.
W0210 Production data was not changed.
Do you want to save?
This error message appears when you try to save a
production program although you have not edited it at all.
When you click the <Yes> button, the machine saves the
production program. When clicking the <No> button, it
cancels the save operation.
E0300 File 'FileName' is not found. The file “FileName”, which you specified in the Edit box to
load it, does not exist. Check the specified file name, and
enter a correct file name.
E0301 Not enough working memory. The memory space becomes insufficient during file loading
process.
Let us know how this error occurred.
E0303 File read error. < %02d[message]
>
An error occurred while the machine was loading the
specified production program.
If this error message appears several times repeatedly, the
disk may be damaged.
E0304 Too many files. The maximum number of files that can be displayed in the list
box is 86 due to system limitations. If this message appears
on the screen, change the current directory to another one.
E0305 This file is not for this machine. This production program file cannot be handled with a KJ-01.
3
E0310 Production data will be lost.
Continue ?
You tried to load another file to the machine although you
changed the current production program and have not saved
it yet.
When you click the <Yes> button, the current program is
discarded, and a new program is loaded. When you click
the <No> button, the machine cancels file-loading operation.
E0311 Date spec. is wrong. You made a mistake in entering a date. Enter a correct one.
E0312 Time spec. is wrong. You made a mistake in entering a time. Enter a correct one.
E0313 Convert failed.< message > This error message appears on the screen if an error occurs
when the machine converts a production program created
with a KE-750/760. Enter correct data with a KE-750/760,
and then load it to the KJ-01 again (refer to the KJ-01
Operation Specifications for details).
E0314 Convert failed. PWB size is
outside the range.
This error message appears if the machine detects the board
dimensions setting not available to the machine when it
converts a production program created with a KE-750/760.
Enter correct data with a KE-750/760, and then load it to the
KJ-01 again.
W0315 It is not a binary scale operation
correspondence model.
If mark used, teaching is done
again
When converting a production program created with a
KE-750/760, the machine displays the mark recognition data
if the original data is binary. The machine converts such
data to gray-scale (multi-value) data.
4
On Printing
Error No. Error Message Corrective Action
E0810 Production data was not exists. Any production program has not been loaded into the
machine. Load the production program file to be printed to
the machine, and print it.
E0811 No production information data. This error message appears on the screen when you try to
print production information with a production program that
has never been used for production. Use the production
program that was used for production to perform the printing
function again.
E0814 Input value too small. This error message appears on the screen if the number
specified as the printing end number is smaller than that of
the printing start number to specify the production program
print mode.
Set the correct number.
E0815 Input value too big. This error message appears on the screen if the number
specified as the printing start number is larger than that of
the printing end number to specify the production program
print mode.
Set the correct number.
E0816 Input value illegal. This error message appears on the screen when you are to
enter a character other than a numeric character in the edit
box to set the production-program printing mode. Allowable
characters are numeric characters only. Enter a correct
value.
E100003 Environment file error
Cannot read printer setting file
pass.
Any printer-setting file or directory may not be created
correctly. Check to see if a directory for a printer-setting file
is created correctly.
E100006 Environment file error.
Not found environment file.
The printer-setting file may be lost.
Check to see if the printer-setting file is created correctly.
E100100 Didn't setup for japanese
environment.
The printer-setting file may be damaged and the setting
necessary for the Japanese environment may not be loaded
to the machine.
Check to see if the printer-setting file is created correctly.
None Printer connect error.
Printer's paper empty. or can't print
status.
The printer may run out of paper.
Replenish the printer with paper to enable it to print data.
Press the <Re-try> switch to resume printing.
None Printer connect error.
Not connect to printer. Confirm
connection to printer.
The printer may not be enabled to print data. Check to see
if the printer is turned on or enter Offline mode.