KJ-01.02.Instruction Manual.REV.02.pdf - 第359页
12 − 2 12.2 Idle Mode This mode is usef ul to use t he machine as a board-t ransporting buff er to tr ansport a board. W hen y ou select the [ 5/Mainte] command f rom the main menu, and then the [ 2/Idle mode] comm and, …
12 − 1
CHAPTER 12 OTHER FUNCTIONS
12.1 Emergency Stop
(1) Emergency Stop switch
The machine has two Emergency Stop switch: each on the front and rear sides
of the machine.
(2) Operation
When you press either of these two Emergency Stop switches, the motor driving
power supply of the main unit is turned off. The dialog box indicating that the
Emergency Stop switch is pressed appears on the screen
(3) Continuing the current process
After releasing the Emergency Stop switch, you can continue the current process.
To do so, click the <OK> button displayed on the dialog box above or press the
ENTER key.
The machine displays the dialog box that asks you whether to return the axes of
the machine to their home position.
When you want to return the axes to their home positions, click the <OK> button.
12 − 2
12.2 Idle Mode
This mode is useful to use the machine as a board-transporting buffer to transport a
board.
When you select the [5/Mainte] command from the main menu, and then the [2/Idle
mode] command, the “Idle mode” dialog box appears on the screen.
“Mainte” pull-down menu
When you select the [2/Idle mode] command, the following screen appears.
When you click the <START> button, the machine starts transporting a board in Idle
mode.
12 − 3
CAUTION
The machine starts operating immediately after a board is sent into the
machine in Idle mode.
To avoid risk of injury, do not place your hand in the machine, nor move
your face or head close to the machine during operation.
Before putting the machine in Idle mode, check to see if there is no one
who is working the internal parts of the machine.
Before putting the machine in Idle mode, check to see there is no obstacle
(tools and jigs) attached or left in the machine that may prevent any part
inside the machine from operating.
When you click the <END> button, the machine quits Idle mode.