KJ-01.02.Instruction Manual.REV.02.pdf - 第325页
9 − 8 9.8 Setting the Time and Date The command “ Set date & tim e” is used to set t he time and date. Figure 9.8. 1 Date & time sett ing dialog box
9 − 7
9.6 Formatting a Disk
The command “Format disk” is used to format a floppy disk.
Figure 9.6.1 Disk formatting dialog box
9.7 Deleting Template Data
This command deletes user-defined template data.
If the error message “Specified template data full. Delete not used template data.”
appears on the screen during file operation, use this function to delete unnecessary
template data.
9 − 8
9.8 Setting the Time and Date
The command “Set date & time” is used to set the time and date.
Figure 9.8.1 Date & time setting dialog box
10 − 1
CHAPTER 10 I/O MANUAL CONTROL
10.1 I/O Manual Control
When you select the [4/Setup] command on the menu bar, and then the [4/Manual
control] command on the displayed menu, the “I/O manual control” initial screen
appears as shown in Figure 10.1.1.
Figure 10.1.1 “I/O manual control” initial screen