KJ-01.02.Instruction Manual.REV.02.pdf - 第361页
12 − 4 12.3 Warming Up Select the “Warm” icon, or click the [5/M ainte] command from the main menu bar , then the [1/W arm up] command. W hen y ou select the [ 1/War m up] comm and, the f ollowing screen appears. W hen y…
12 − 3
CAUTION
The machine starts operating immediately after a board is sent into the
machine in Idle mode.
To avoid risk of injury, do not place your hand in the machine, nor move
your face or head close to the machine during operation.
Before putting the machine in Idle mode, check to see if there is no one
who is working the internal parts of the machine.
Before putting the machine in Idle mode, check to see there is no obstacle
(tools and jigs) attached or left in the machine that may prevent any part
inside the machine from operating.
When you click the <END> button, the machine quits Idle mode.
12 − 4
12.3 Warming Up
Select the “Warm” icon, or click the [5/Mainte] command from the main menu bar, then
the [1/Warm up] command.
When you select the [1/Warm up] command, the following screen appears.
When you click the <OK> button, the machine starts warming up.
12 − 5
The following screen is being displayed during warm-up.
When you click the <END> button or press the ENTER key, the machine finishes
warming up.