KJ-01.02.Instruction Manual.REV.02.pdf - 第398页

2 E0104 Can not copy to same directory . Y ou cannot perform any “copy” operation if the copy source directory is the same as the copy destination directory . Change the copy destination directory to copy data. W 0106 No…

Error Message List

On File Operations

Error No. Error Message Corrective Action

E000000 Message File Error There is no error message file or the existing error message

file may have an error. Let us know the number displayed

on your screen.

E0001 File I/O error. <##[message]> An error occurred during basic file access operation. The

displayed message corresponds to the MS-DOS error

number (it indicates an error related to a directory). If this

error frequently occurs, let us know the number displayed on

your screen and how this error occurred.

E0002 Bad letter(s) in specified file name. This file name includes a character(s) that cannot be used for

a file name. Check characters available to a file name.

E0003 Reserved file name by DOS

(Special files).

The special file indicates the character strings reserved

under MS-DOS.

You cannot specify any of these character strings as a file

name.

Specify a file name using characters not included in these

strings (reserved file names: CON, AUX, PRN, CLOCL$,

COM, LPT).

E0004 No production data to save. There is no production program to be stored. If you have

never loaded a production file or if you have never edited a

new file after the system starts up, this error message

appears on the screen.

E0008 Already, directory exists. You cannot create a directory whose name has already used

for the existing directory. Check the directory name again.

E0009 No directory was found. This error message appears on the screen when you try to

delete a directory that does not exist. Check the directory

name again.

E0010 System error.|Can't be formatted. This disk may be damaged. Format another disk. If this

error occurs again, let us know the operation you have done.

W0011 Specified template data full.|Delete

not used template data.

This error message appears on the screen when the VCS

memory is full, for example because you stored a production

program that was used for teaching a user designated

template. Delete unnecessary templates with the File

maintenance command, and store the production program

again.

E0012 File I/O error. <##[message]> An error occurs during basic file access operation. The

displayed message corresponds to the MS-DOS error

number (it indicates an error related to a directory). If this

error frequently occurs, let us know the number displayed on

your screen and how this error occurred.

E0013 File exists under specified

directory.

This error message appears on the screen if there is (are) a

file(s) or directory (directories) under the directory you try to

delete. Before deleting a directory, delete all files and

directories located under the directory.

E0100 Not enough working memory The unoccupied memory space becomes insufficient during

disk formatting process. Let us know how this error

occurred.

E0103 Disk full. You cannot perform any “copy” operation due to insufficient

memory space of the copy destination drive. Change the

destination drive to another one, and copy the data.

E0104 Can not copy to same directory. You cannot perform any “copy” operation if the copy source

directory is the same as the copy destination directory.

Change the copy destination directory to copy data.

W0106 No file was found. This error message appears on the screen when you click

the <Check

> button although no file is displayed in the file list

box.

Change the current directory to another one, and click the

<Check

> box only after files appear in the file list box.

W0110 File '%s' exists in

destination.Overwrite?

There is already a file “fileName”, which you selected during

copy operation, on the copy destination. If you want to

overwrite the existing file, click the <Yes> button.

Otherwise, click the <No> button.

E0111 File '%s' exists. Can not rename. Since the file “FileName”, which you specify during file

renaming operation, already exists, you cannot rename the

specified file.

E0112 New file name is not specified. You have not specified a new file name yet to rename the file.

Enter a new file name.

W0200 File ”FileName” exists.

Overwrite?

A file already exists whose name is the same as “FileName”,

which you specify to save the current file as another name.

When you click the <Yes> button, the existing file is

overwritten with the specified file. When clicking the <No>

button, the save process is cancelled.

E0201 Disk full. There is no memory space for saving a file or saving a file as

another file.

Delete unnecessary files or save it onto another drive.

E0203 File write error. <##[message]> A file writing error occurs while the machine is saving a file.

This error message appears on the screen when the disk is

damaged.

If you are using a floppy disk, replace it with a new one. If

using a silicone disk, let us know the number displayed on

the screen.

E0208 File name is not correct. The new file name you specified to save the current file as

another file is incorrect. Check the entered name, and enter

a correct name.

W0210 Production data was not changed.

Do you want to save?

This error message appears when you try to save a

production program although you have not edited it at all.

When you click the <Yes> button, the machine saves the

production program. When clicking the <No> button, it

cancels the save operation.

E0300 File 'FileName' is not found. The file “FileName”, which you specified in the Edit box to

load it, does not exist. Check the specified file name, and

enter a correct file name.

E0301 Not enough working memory. The memory space becomes insufficient during file loading

process.

Let us know how this error occurred.

E0303 File read error. < %02d[message]

An error occurred while the machine was loading the

specified production program.

If this error message appears several times repeatedly, the

disk may be damaged.

E0304 Too many files. The maximum number of files that can be displayed in the list

box is 86 due to system limitations. If this message appears

on the screen, change the current directory to another one.

E0305 This file is not for this machine. This production program file cannot be handled with a KJ-01.

E0310 Production data will be lost.

Continue ?

You tried to load another file to the machine although you

changed the current production program and have not saved

it yet.

When you click the <Yes> button, the current program is

discarded, and a new program is loaded. When you click

the <No> button, the machine cancels file-loading operation.

E0311 Date spec. is wrong. You made a mistake in entering a date. Enter a correct one.

E0312 Time spec. is wrong. You made a mistake in entering a time. Enter a correct one.

E0313 Convert failed.< message > This error message appears on the screen if an error occurs

when the machine converts a production program created

with a KE-750/760. Enter correct data with a KE-750/760,

and then load it to the KJ-01 again (refer to the KJ-01

Operation Specifications for details).

E0314 Convert failed. PWB size is

outside the range.

This error message appears if the machine detects the board

dimensions setting not available to the machine when it

converts a production program created with a KE-750/760.

Enter correct data with a KE-750/760, and then load it to the

KJ-01 again.

W0315 It is not a binary scale operation

correspondence model.

If mark used, teaching is done

again

When converting a production program created with a

KE-750/760, the machine displays the mark recognition data

if the original data is binary. The machine converts such

data to gray-scale (multi-value) data.