KJ-01.02.Instruction Manual.REV.02.pdf - 第141页

5 − 45 5.5.1 Data entry procedure (1) Screen display T he working screen f or the component data is shown whether in the for m or list for mat. Fig ure 5.5. 1.1 shows a typical form scr een and Figure 5. 5.1.2 shows a ty…

100%1 / 419
5 − 44
② Items when a component is centered with the VCS
Available setting range
Displayed item Description
Minimum value Maximum value
Teaching
1 Retry times
1
(The machine tries
to pick up a
component up to
twice.)
0 9 Not available
2 Placing stroke
0.5 mm
(without any sign)
0.0mm 4.0mm Not available
3 Picking stroke
0.5 mm
(without any sign)
0.0mm 4.0mm Not available
4 Trial No Either “Yes” or “No” Not available
Speed
XY speed Automatically
calculated according
to the component
type.
Fast
Mid (Middle), or
Slow
Not available
Picking Z down Automatically
calculated according
to the component
type.
Fast
Mid (Middle), or
Slow
Not available
Picking Z up Automatically
calculated according
to the component
type.
Fast
Mid (Middle), or
Slow
Not available
Placing Z down Automatically
calculated according
to the component
type.
Fast
Mid (Middle), or
Slow
Not available
Placing Z up Automatically
calculated according
to the component
type.
Fast
Mid (Middle), or
Slow
Not available
5
Theta speed Automatically
calculated according
to the component
type.
Fast
Mid (Middle), or
Slow
Not available
6
Compo. aband.
(Component
abandonment)
Trash box Either “Trash box” or “Trash Conveyor.” Not available
7 Placing offset X 0.00mm -99.00mm 99.00mm Not available
8 Placing offset Y 0.00mm -99.00mm 99.00mm Not available
9 Picking depth 0.00mm 0.00mm 12.00mm Not available
10 Recog. offset X 0.00mm -50.00mm 50.00mm Not available
11 Recog. offset Y 0.00mm -50.00mm 50.00mm Not available
Dimension check No Either “Yes” or “No” Not available
Std. Size W.
(Standard size
width)
Automatically
calculated based on
the dimensions of a
component.
0.00mm Width of a component Not available
Std. Size L.
(Standard size
length)
Automatically
calculated based on
the dimensions of a
component.
0.00mm Width of a component Not available
W. Judge Max.
(Width judgment
maximum level)
15% 1% 100% Not available
W. Judge Min
(Width judgment
maximum level)
15% 1% 100% Not available
L. Judge Max
(Length judgment
maximum level)
15% 1% 100% Not available
12
L. Judge Min
(Length judgment
minimum level)
15% 1% 100% Not available
5 − 45
5.5.1 Data entry procedure
(1) Screen display
The working screen for the component data is shown whether in the form or list
format. Figure 5.5.1.1 shows a typical form screen and Figure 5.5.1.2 shows a
typical list screen.
Figure 5.5.1.1 Component data form screen
Figure 5.5.1.2.1 Component data list left screen
To switch between form screen and list screen, designate [1/ Component form]
or [2/ Component list] respectively from [4/ Dspl.]. Pressing the F9 key also
switches the display between form and list.
Component
window
Tape
window
Expanded
window
5 − 46
(2) Basic operations
① Window display
When no data has been entered, only the “Component” window is open. As
entries are made for the component items, the associated “Package” window
is open.
The “Expanded” window appears when the centering system is determined.
Each window once displayed are available next time and after when the
component data input screen appears.
② Moving through windows
The field selection keys are used to move through the opened windows.
③ Moving through items
To move to the desired item within the window, use the <↑> key or the
<↓> key.
④ Entry of mutually exclusive items
If no entry has been made for a mutually exclusive item, a pop-up menu
automatically appears: you select an item from the dialog box. After the
selection has been made, the cursor stays put. To make change, press the
Edit key (F2) to open a pop-up menu so that you can reselect an item. If a
setting has previously been made, the pop-up menu does not appear even
when the cursor is located at the item unless the Edit key (F2) is pressed.
⑤ Moving to previous or next component data
In the form screen, the PAGE UP and PAGE DOWN keys are used to move
to previous or next component data. In the list screen, the PAGE UP and
PAGE DOWN keys are used to display a total of 18 sets of previous or next
data, respectively. This function is not effective when the last data is being
displayed.
<1> Working on the component window
① Comment
As a comment, up to 30 alphanumeric characters or symbols can be entered
from the keyboard. (Comment entry can be omitted.)
② Comp. package
When the cursor is placed at this item, a dialog box for component package
setting as shown in Figure 5.5.1.3 appears. Select the desired item.
Since the machine is equipped with only one tray, you can set up to five pick
data records on which a tray is selected as the component package if you
select “Tray” as the “Compo. package.”
Component
Tape
Tray
Expansion
TAB
SHIFT
TAB
+
: Counter clockwise
: Clockwise Key
Key