KJ-01.02.Instruction Manual.REV.02.pdf - 第197页
5 − 101 5.7.2.2 Measurement conditi ons setti ng A screen as shown below appears w hen “Single Measurement” is select ed on the menu. Component data measurement screen (1) Execute position Explanation of measurement scre…
5 − 100
• Set the measurement items on the “Measurement Conditions” screen.
• When you select the Measurement button, the system executes
measurement, then displays the measurement result when it is complete.
Note: If the component pick up error, or laser or VCS recognition error
occurs, the error type is displayed without measurement result.
• When you select the OK button on the Measurement result screen, the
measurement result is stored as the “Component data”, then the system
returns to the Measurement conditions screen.
• When you select the Cancel button on the Measurement result screen, the
system returns to the Measurement conditions screen without storing the
measurement result.
• Manual teaching and input of the pick position coordinate are possible on the
Measurement conditions screen. If “Stored as pick data” is checked, the pick
position can be stored as the Pick data.
Note: The pick position of the components supplied with the tray cannot be
stored as the “Pick data”.
• When you select the NEXT or PREVIOUS button of the HOD or the F5 or
F6 key on the Measurement conditions screen, the system can move to the
alternative component.
CAUTION
The OCC starts moving to the component pick-up position
immediately after you click the <MEAS> button.
To avoid risk of injury, do not place your hand in the machine, nor
move your face or head close to the machine while you are
operating the HOD.
Before clicking the <MEAS> button, check to see if there is no one
who is working the internal parts of the machine.
Before clicking the <MEAS> button, check to see if there is no one
who is near the machine and can be injured when the machine
warms up.
Before clicking the <MEAS> button, check to see there is no
obstacle (tools and jigs) attached or left in the machine that may
prevent any part inside the machine from operating.
5 − 101
5.7.2.2 Measurement conditions setting
A screen as shown below appears when “Single Measurement” is selected on the
menu.
Component data measurement screen
(1) Execute position
Explanation of measurement screen
Pick position ＃－＃＃
Supplied
with
＃ ＃＃
Tape
Bulk
Stick
Ｆ Front side
Ｒ Rear side
Hole number
Holder
Ｒ Rear side
＊＊
Hole number
Component number
Component package
Pick position
Front side →F
Rear side →R
Component type
Component name
5 − 102
(2) Pick position
① X, Y, and Z coordinates:
The coordinates of the current pick position
Manual input and teaching are possible.
Note: These coordinates are not stored to Pick data.
② Stored as the “Pick data”
If “Stored as Pick data” is checked, the pick position can be stored as the
Pick data.
Note: The components fed with a tray cannot be stored as the Pick data.
(3) Measurement items
① Vac. level of comp. pick (Vacuum level of component picking):
Measures the vacuum pressure used for picking up a component.
② Height:
Measures the component height.
③ Outline:
Measures the dimensions of the component package.
④ Lead info.:
Measures the component lead information.
See “5.10.1.2 Functions” for what to be measured.
Notes:
−
No measurement is possible if the “Component data” or “Pick
data” is incomplete.
−
The measurement result is displayed on the Measurement
result screen.
−
If a component pick error, or laser or VCS recognition error
occurs, the error type is displayed without measurement result.
(4) Operation buttons
① Measurement button (F10 key):
Performs the selected measurement.
② OK button:
Makes the stored data valid, then exits the screen.
③ Cancel button:
Makes the stored data invalid, then exits the screen.
④ Feed button (F4 key):
Feeds a component with a feeder other than a 32 mm paper feeders.
Every time you press the button, the feeder feeds a component.