KJ-01.02.Instruction Manual.REV.02.pdf - 第190页

5 − 94 (2) Limit ed it ems – Component type The m easurement it ems f or each component type are as follows: Measurement i tems No. Component ty pe Centering method V ac. level of comp. pick Height Note 3 Outline Lead in…

100%1 / 419
5 − 93
• The nozzle number should be changed depending on the measured
dimensions. In this case, inquiry the nozzle number change operation.
When you select “Yes” for the inquiry operation, the nozzle number is
changed, then the vacuum pressure is initialized.
Note: When the nozzle number is changed, perform the measurement
operation again.
Components centered with the VCS (only for a KJ-02)
• The machine uses the VCS to recognize a component, and measures the
dimensions of the component based on the recognized leads.
Note: Since the machine measures the component dimensions based
on its leads recognized, they may be different from those
defined on the Component data screen or Vision data screen.
• The machine may not measure some components. See the applicable
components described under “(2) Limited items” for details.
• You may have to change the nozzle number depending on the
dimensions the machine measured. In such a case, the machine
displays the confirmation message that asks you to change the nozzle
number. When you click the <Yes> button, the machine changes the
nozzle number, and initializes the vacuum pressure.
Note: When the nozzle number is changed, measure the component
dimensions again.
• Lead info (only for a KJ-02)
When you check this item, the machine uses the VCS to recognize a
component, and measures the lead pitch, length of a lead, number of leads,
and missing leads.
Notes:
−
The measurement result may be wrong depending on the
conditions of leads of a component the machine measured.
−
The machine may not measure some components. See the
applicable components described under “(2) Limited items” for
details.
5 − 94
(2) Limited items
– Component type
The measurement items for each component type are as follows:
Measurement items
No. Component type
Centering
method
Vac. level of
comp. pick
Height
Note 3
Outline Lead info.
1 Square chip Laser
K○ K○ K○ K×
2 MELF Laser
K○ K○ K○ K×
Laser
K○ K○ K× K×
3 Aluminum electrolytic
capacitor
Vision
K○ K○ K× K×
4 SOT Laser
K○ K○ K○ K×
Laser
K○ K○ K× K×
5 SOP
Vision
K○ K○
○ Note2 ○ Note2
Laser
K○ K○ K○ K×
6 HSOP
Vision
K○ K○ K○ Note2 K×
Laser
K○ K○ K× K×
7 SOJ
Vision
K○ K○ K× K×
Laser
K○ K○ K× K×
8 QFP
Vision
K○ K○
○ Note2 ○ Note2
Laser
K○ K○ K× K×
9 PLCC (QFJ)
Vision
K○ K○ K× K×
Laser
K○ K○ K× K×
10 PQFP (BQFP)
Vision
K○ K○
○ Note2 ○ Note2
Laser
K○ K○ K× K×
11 TSOP
Vision
K○ K○
○ Note2 ○ Note2
Laser
K○ K○ K× K×
12 TSOP2
Vision
K○ K○
○ Note2 ○ Note2
Laser
K○ K○ K× K×
13 BGA
Vision
K○ K○ K× K×
14
FBGA Note 1
Vision
K○ K○ K× K×
15 Network resistance Laser
K○ K○ K× K×
16 Trimmer Laser
K○ K○ K× K×
17
GaAsFET Note 1
Vision
K○ K○ K× K×
Laser
K○ K○ K× K×
18 One-direction lead connector
Vision
K○ K○ K× K×
Laser
K○ K○
○ Note2 ○ Note2
19 Two-way lead connector
Vision
K○ K○ K× K×
Laser
K○ K○ K× K×
20 Z style lead connector
Vision
K○ K○ K× K×
Laser
K○ K○ K× K×
21 J-type read socket
Vision
K○ K○ K× K×
22 Gull wing socket Laser
K○ K○ K× K×
5 − 95
Vision
K○ K○ K× K×
Laser
K○ K○ K× K×
23 Socket with a bumper
Vision
K○ K○ K× K×
24 Outline-to-be-recognized
components (See Note1)
Vision
K○ K○
× ×
25 Others Laser
K○ K○
× ×
○ :To be measured
× : Not to be measured