Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第142页
6-32 Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide the <Get> button. <5. Mar k T ype> group Select the color of bad mark. A vailable colors of bad marks are as follows. Black: the mark looks …
6-31
Board Definition
Figure6.7 “Bad Mark Position” dialog box (When the Position Type is “Array”)
1: Grid Cell
<No> column
A serial number of bad mark data.
<X> column
The X position value of the bad mark.
<Y> column
The Y position value of the bad mark.
<4. Teach> group
Used for moving the fiducial camera to the assigned position of coordinates by
rotating XY axis driving motor, or for obtaining the present coordinates of the fiducial
camera.
<Device> combo box
Select the Camera for checking Bad Mark. Selectable objects are as follows;
Fid Cam2: Select the fiducial camera on the front gantry.
<Move> button
Move the object selected in the <Device> combo box to the position of the
assigned coordinates. Before executing <Move> button, the cell in the grid
(Coordinates of the bad mark) corresponding to the desired position must be
clicked on with a mouse.
<Get> button
Obtain coordinates for XY, Z axis with reference to the object selected in the
<Device> combo box. At this time, the objects (Coordinates of the bad mark)
related with coordinates must first be clicked with the mouse before clicking on
6-32
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
the <Get> button.
<5. Mark Type> group
Select the color of bad mark. Available colors of bad marks are as follows.
Black: the mark looks darker than the surroundings.
White: the mark looks lighter than the surroundings.
<6. Offset> group
Used to set the offset value between bad marks automatically. It is enabled when
is selected in the <2. Position Type> combo box.
<X> edit box
Set the offset value of X.
<Y> edit box
Set the offset value of Y.
<Teach> button
Teach the offset value of bad mark. When this Button is clicked on, the following
screens are displayed in succession.
Teach the first position of the bad mark. When the “Enter” key is pressed after
teaching, the following screen is displayed.
Teach the position of the neighboring second bad mark. When the “Enter” key is
pressed after teaching, the following screen is displayed
6-33
Board Definition
Press the “Enter” key to complete the bad mark offset value teaching operation.
<Apply> button
Automatically creates the bad mark position data by using the offset value set
in this group.
<7. Mark Size> group
Set the area in which to search the bad mark. The main purpose of this feature is to
limit the search range for when there are forms similar to the mark near the mark such
that they can interfere with recognition on certain PCBs.
<Width X> edit box
Set the value of search range in X axis direction. In general, it is 6 mm..
<Width Y> edit box
Set the value of search range in Y axis direction. In general, it is 6 mm.
<8. Parameter> group
<Threshold> edit box
The image viewed through the SM Vision window is composed of each pixel.
Each pixel has a unique value between 0 and 255 according to the seen degree of
brightness. Here, ‘Threshold Value’ indicates the border value deciding whether
each pixel should be recognized in white or black. That is, setup the limitation for
deciding if the image pixel should be black or white when checking a bad mark.
For example, if <Bad Mark> is “Black” and the <Threshold> value is 100, then all
the values under 100 in the vision image are recognized as black, and if <Bad
Mark> is “White” and the <Threshold> value is 100, then all values over 100 are
recognized as white.
<Real Display/Binary> button
Shows the image seen through the SMVision in real display to which threshold is
not applied, or in the image (Binary) to which threshold is applied as recognized
by MMI.
<Light> group
Set the light value for bad mark inspection. In general it is 7, but adjust it