Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第34页
Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide xx About virus protection For the safe use of th e m achine, t he m achine system shall be m a intained nor mally t hr ough virus protection. Basic items to be…
Preface
xix
About Warranty
The warranty is issued to cover the following machine faults and malfunctions.
However, the contents of the warranty stipulated at the time of purchase take
precedence over the above coverage.
What is covered by
the warranty
If any part of the machine fails to function properly under normal
conditions of usage due to defects in material or workmanship, it will
be repaired by Hanwha Precision Machinery Co., Ltd. at no charge for
either parts or labor.
Time period of the
warranty
The term of this warranty shall expire for any of the following cases:
24 months after delivery from the fac
tory
24 months after installation
What is not
covered by the
warranty
Any of the following cases are not covered by this warranty:
Data lost due to HDD damage. (Please back up the data
periodically.)
Malfunction of the system due to the execution of a program
regardless of machine operation, as well as data damage due to
infection by any computer viruses.
Damage due to due to long-term use or defe
cts due to the wear
arising from normal use (natural fading of coating and plating,
wearing-out of parts, etc.).
Delicate changes which do not affect the functional quality (such
as noise from a controller, sound of a rotating motor, etc.).
Defects due to ambient conditions (moisture, impurities, dust on
the machine, oil mist, etc.).
When failure occurs to the machine due to customer's mistake.
Def
ects resulting from the following cases are also not covered by
this warranty:
Natural disasters such as earthquake, typhoon, flood and
lightning strike, or accident, fire, etc.
Modification which was not approved by our company or agents.
F
ailure to back up the data stored in the machine.
Use of parts or lubricants other than those designated.
Insufficient or defective maintenance or inspectio
n.
Adjustments performed by persons other than designated agents.
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
xx
About virus protection
For the safe use of the machine, the machine system shall be maintained normally through
virus protection.
Basic items to be observed for virus protection are as follows:
Install the anti-virus program (TrustLine) provided by us so that any virus can be
treated by performing a virus check periodically. When installing the program,
contact our C/S (STS) or local agent.
Run the anti-virus program and check for viruses without fail before starting the
machine and preparing production. Running the anti-virus program during
production may affect the performance of the machine.
Update the anti-virus program engine periodically. Use a PC without a virus as an
update server when updating the anti-virus program engine for the machine
system.
For the corresponding PC, update the anti-virus program engine periodically
through the Internet and perform configuration in the ant-virus program to update
the anti-virus program engine of the machine by sharing the folder in which the
updated file is saved with the machine system.
When loading a PCB file or saving it in the system using storage media including
USBs, perform an anti-virus check first on the corresponding storage media and
check for any problems.
When using a shared folder in the machine system as necessary, set the password
for the shared folder without fail.
Preface
xxi
About This Manual
Composition of this Manual
The manual for this machine is comprised as follows;
Handbook
Operation Handbook
Describes briefly a series of processes that is performed by the operator.
Maintenance Handbook
Describes briefly basic points related to maintenance of the machine;
Preparation for maintenance, daily inspection, periodical inspection, cleaning
and lubrication method, definition of consumables including replacement time
and method.
Administrator’s Guide
Describes the program for PCB production or various system setups related to the
machine;
User’s account administration and authority setup, board definition, component
registration, feeding device setup, step programming, optimization, production
setup, teaching and placement test, machine calibration, system setup, machine
diagnosis, utility menu setup and production information management.
Troubleshooting Guide
Describes definition and the method used to take measures against the errors.
Describes definition and solution for error codes and the errors not defined.
Technical Reference
Provides part information for the maintenance and various technical drawings.
Symbols other than safety marks used in this manual.
The meanings of symbols used in this manual are as follows.
Ref. Reference indicates a part to be referred to.
Memo Describes useful information related to the text or definition of terms.