Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第93页

4-11 Tools Shortcut M enu  <Put all nozzle> button When this Button is clicked on, put s the nozzles in all the heads to the ANC.  <V iew All Nozzles / Move Heads S a fe> button Used to move down the Z a xi…

4-10

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

Move the object selected in the Combo Box to the position of the assigned

coordinates. At this time, before executing <Move> button, the hole

corresponding to the desired position must be clicked on with a mouse.

 <Get> button

Obtain coordinates for XY axis with reference to the object selected in the Combo

Box. At this time, before executing <Get> button, the hole corresponding to the

desired position must be clicked on with a mouse.

 <Fiducial Mark Detail…> button

Set the ANC fiducial mark data. For more details. refer to Section “6.3. Fiducial Mark

Setup”.

 <Move Next Hole> button

Moves the device selected from the Combo Box in <Teach> group to the hole next to

the currently selected hole in the ANC.

 <Shutter Open/Close> button

When this Button is clicked on, the ANC shutter is Opened or Closed.

 <Head-Inspect Nozzle Type> button

Clicking this Button will perform the inspection of the type of the nozzle inserted in

the nozzle holder of the currently selected head. Since separate setup is needed to

enable this function, our C/S department must first be contacted.

The nozzles whose types can be checked are as follows:

CN030, CN040, CN065, CN140, CN220

 <All-Inspect Nozzle Type> button

Clicking this Button will inspect the types of nozzles inserted in the nozzle holders of

all heads. Since separate setup is needed to enable this function, our C/S department

must first be contacted.

The nozzles whose types can be checked are as follows:

CN030, CN040, CN065, CN140, CN220

 <Pick & Put> group

 <No real motion> check box

When this Button is checked, manipulates the data for pick and put functions

without actual operation.

 <Pick> button

When this Button is clicked on, picks up the nozzle in the currently selected hole

of the ANC. Select the head to pick in the Combo Box in the <Teach> group.

 <Put> button

When this Button is clicked on, puts the nozzle in the head selected in the

“Device” to ANC.

4-11

Tools Shortcut Menu

 <Put all nozzle> button

When this Button is clicked on, puts the nozzles in all the heads to the ANC.

 <View All Nozzles / Move Heads Safe> button

Used to move down the Z axis of all heads of the selected gantry of certain height so as

to check visually if any nozzle exists on the nozzle head.

After the visual check, if clicked again, Z axes of all heads are moved up to the

original position.

 <Different ANC Info.In Current PCB file> list box

Shows the difference between the ANC setting of the currently loaded PCB file and

the ANC setting of the currently working equipment system. To change the system

setting to the PCB file setting, click on the <PCB->System> button on the right and

change the nozzles in other holes with different settings to fit the setting.

 <PCB->System> button

Change the system setup to the PCB file setup

Warning When Manual ANC movement is executed, the nozzle of

the head and other areas of the machine might collide

unless the programmed nozzle and the actual nozzle

coincide. Be sure to match the programmed nozzle and the

actual nozzle in the machine.

 <Close> button

Pressing this Button will save the changed setup and close the current dialog box.

4-12

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

4.4. Operation Mode Change

The accessible MMI menu is different according to the user mode. According to the

purpose of using the MMI, users are classified into Operator, Programmer, Manager and

Service. Please refer to “Chapter 1. Operation Mode and Password Change” for more

information.

4.5. Conveyor

Used to correct the problem occurred during run operation.

Figure4.4 Conveyor System dialog box

4.5.1. PCB In/Out Function

Able to place PCB in the working station in the conveyor or forward it to the next process

of the working station in the conveyor using ‘drag & drop’ with the mouse.

To put a PCB into the machine, select the light green PCB on the left with the mouse and

drag it to the working station to put and drop it (drag and drop). To release a PCB from the

machine, select the PCB in the working station to release and drag and drop it to the light

green PCB on the left (drag and drop).

 Board Flow (left Explain for the instance of right side)

 The PCB is moved to the working station by ‘drag and drop’ of a PCB in standby

at the left hand side.