Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第466页

15-30 Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide  <File Menu> T ab Sets the authorization level for the submenus of <File Menu> menu. The authorization se tup c an be used only for the Servic…

15-29

System Setup

 <Update> button

Saves the setup and closes the dialog box.

 <Cancel> button

Neglects the setup and closes the dialog box.

 <Default> button

Recovers the setup to the default (recommended) setup in the machine.

 <PCB Edit> Tab

Sets the authorization level for the submenus of the <PCB Edit> menu.

 <Product> Tab

Sets the authorization level for the submenus of <Product> menu.

 <Utiliy> Tab

Sets the authorization level for the submenus of <Utility> menu.

 <Diagnosis> Tab

Sets the authorization level for the submenus of the <Diagnosis> menu.

 <SysSetup> Tab

Sets the authorization level for the submenus of <Sys.Setup> menu..

 <Tools Menu> Tab

Sets the authorization level for the submenus of <Tools Menu> menu.

15-30

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

 <File Menu> Tab

Sets the authorization level for the submenus of <File Menu> menu.

The authorization setup can be used only for the Service mode or higher. It is set up by

checking or releasing the check of the check box for the corresponding item in the

Setup screen..

Submenus of the corresponding menu are enabled or disabled as shown below

according to the setup performed in the Setup menu. The disabled menu cannot be

used.

1: User authorization level setup menu

2: User authorization level release menu

 <Telemetry Auto Save> check box

Selecting this check box will allow the Telemetry Log file to be saved automatically

when an emergency condition occurs. The name of the folder and file for default

saving is “C:SmartSM\Log\Machine Type_SW Version_Machine Unit

Information_Time of Occurrence(_E-Error Code).tmr”.

The basic concept for saving a log file is as follows:

 1st Stage

1. Clicking the Stop button (<Up Load> button) will:

In the Start state: Upload and save the file automatically.

In the Stop state: Save the uploaded information in the file automatically.

2. Clicking the Start button will:

In the Start state: Change the state to the Stop state and save the file

automatically. The state is then changed to the Start state.

In the Stop state: Delete the uploaded information and change the state to the

Start state.

3. Define the rule for naming files when using automatic saving.

15-31

System Setup

(Machine Type and Version_Unit Information_Creation Date_E-Auto_File

Index.tmr)

Ex) SM411V1.047_Undefined_20080317_103705_E-Auto_0.tmr

4. Save the Telemetry file in the Log directory.

5. Of the Telemetry files automatically saved in the Log directory, only the five

most recent files are kept and older files are deleted automatically.

When performing works including measurement with the Telemetry being

finished forcedly, press the <Upload> button to change the state to the Stop state

and minimize the Telemetry screen and then perform the work.

 2nd Stage

 When an EMG level error occurs, save the log automatically and stop/start the

system automatically.

 Define the rule for naming files when using automatic saving using the details

of the error.

(Machine Type and Version_Unit Information_Creation Date_E-Auto_File

Index.tmr)

Since the automatic Telemetry saving function may decrease the systems’

performance, use an option to turn off the corresponding function when faced with this

problem.

 <Scale> option button group

Able to setup the system of unit (mm/inch/mil) used by MMI of the equipment.

 <Confirm before Move> option button group

Determines whether to display the confirm window prior to movement.

 <None> option button: when this button is selected, does not display the confirm

message box when the movement command is transferred to the equipment.

 <Z axis> option button: If this button is selected, when the movement command is

transferred to the equipment, displays the confirm message box if the command is

for Z-axis movement.

 <XY, Z axis> option button: If this button is selected, when the movement

command is transmitted to the equipment, displays the confirm message box if the

command is for XY, and Z axes movement.

 <Use OLP DB> check box

Selected when synchronize the part DB of each machine in the inline composed of

several machines.

Selecting this check box will allow the part DB to be shared between machines by

transmitting the part DB of the current machine to the T-OLP of the T-Solution.

 <Use 2D Barcode> check box

In order to set the 2D barcode parameter of the PCB, select this check box.