Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第82页

3-18 Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide 3.6. Windows Tools 3.6.1. Explorer Executes the Win dows Explorer incorporated in the W indows program. 3.6.2. Calculator Executes the Calculator incorporat…

3-17

File Shortcut Menu

Click the <Merge> button to merge the corresponding item into the part library.

3.5. Error Message Bar Show/Hide

Indicates or hides the error message bar at the bottom of the screen.

3-18

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

3.6. Windows Tools

3.6.1. Explorer

Executes the Windows Explorer incorporated in the Windows program.

3.6.2. Calculator

Executes the Calculator incorporated in the Windows program.

3.6.3. Paint

Executes the Picture Pad incorporated in the Windows program.

3.6.4. Notepad

Executes the Memo Pad incorporated in the Windows program.

3.7. Exit

Use the <Exit> command to end an MMI application session. When the <Exit> command

is selected, any MMI session is terminated. It is possible to exit only when the machine is

in idle state.

Memo The MMI can be exited only when the user login has been performed

as Manager or Program Administrator.

Warning System needs to be shut down after normally ending the

MMI, otherwise, the machine might be damaged and injury

could occur due to system error caused by irregular shut

down. Be sure to shut down the system after normally

ending the MMI.

Caution Exiting the MMI forcedly by executing the [Alt+F4]

command without exiting it normally through ‘Exit’

command will delay the exit of the Windows. Be sure to shut

down the system after normally ending the MMI.

4-1

Tools Shortcut Menu

Chapter4. Tools Shortcut Menu

The Shortcut Menu facilitates the use of frequently used commands. It consists of 12

menus:

 Return to Origin, Show SMVision,

 ANC Setup, Operation Mode Change

 Conveyor / Manual Tool

 Current Position / Dump Information (Place Error)

 Part Dump All / Docking Cart Up/Down

 PM Manager / Data Logging

Figure4.1 Shot Cut Bar

4.1. Return To Origin

Returns the X, Y, Z, Theta(R) motors, and Mirror axis to the origin.