Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第17页
Preface iii Safety Precaution Following labels described in each section are a ttached on specific position of this machine. Follow the instructions on each lab el for operating this machine safely . If a l a bel has c o…
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
ii
About Safety
In order to use this machine properly and safely, observe the rules and instructions
regarding safety mentioned in this manual.
Basic items to be observed while using this machine are as follows:
In order to use the machine properly and safely, users must receive appropriate
training.
When performing machine inspection, part replacement, repair or internal setup,
turn off the power switch.
Repairs and maintenance of this machine not mentioned in this manual should
only be performed by a service engineer authorized by Hanwha Precision
Machinery Co., Ltd. No repairs or maintenance should be done by a customer at
their discretion. Otherwise, unexpected accidents may occur.
First, teach the machine after checking for safety around the machine and take
measures against any errors that occurred to the machine while not in its 'READY'
state.
Do not use the machine where inflammable gas is present or contamination is
severe.
Cautions to be exercised for safety are described in this manual as follows:
Danger Indicates an imminently hazardous situation which, if
remarks following this symbol are not observed, will result in
death or serious injury. Therefore, instructions must be
followed without fail.
Warning Indicates a potentially hazardous situation which, if remarks
following this symbol are not observed, will result in death or
serious injury. Therefore, instructions must be followed
without fail.
Caution If remarks following this symbol are not observed, damage
to the machine, embedded program, data, etc. may occur,
or accidents involving personal injury may occur. Therefore,
instructions must be followed without fail.
Preface
iii
Safety Precaution
Following labels described in each section are attached on specific position of this
machine. Follow the instructions on each label for operating this machine safely.
If a label has come off or has damaged, put a new one on a specific position referring to the
following figures. For ordering a new label or offering any comment, questions, please
contact to the business department or the local agent designated by Hanwha Precision
Machinery Co., Ltd.
Front View of the Machine
The following labels are attached on the front part of this machine.
Figurei.1 Safety labels attached on the front part of the machine
Do not open the door during operation.
Part where this label is attached contains
moving parts, it is very dangerous if the user
open the cover while operating.
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
iv
As the current with high-voltage flows inside
the cover or in the area near the switch,
take precautions against electric shock.
Be sure to turn off the main switch in the
left-lower cover of the rear side before
maintenance.
Do not remove the safety device. It could
cause personal injuries or serious
problems.
Do not put a hand in during operation.
Part where this label is attached contains
moving
parts, it is very dangerous if the user
disassembles any part or opens the cover
while operating.
Sto
p the machine before servicing.
Stop the machine before maintenance or
error troubleshooting.