Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第62页

2-4 Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide  Help Provides the help in HTML fo rm a t for the application program o f this equipment. 2.1.2.2. Main Toolbar 2.1.2.2.1. The submenu tool-bars of the PCB …

2-3

Structure of MMI Menu

 ANC

Registers various information on the ANC (Auto Nozzle Changer).

 Operation mode

Changes the operation mode.

 Conveyor

Executes the conveyor dialog box.

 Position

Used when it is necessary to refer to the current coordinate of each driving axis during

teaching or calibration.

 Manual Tool

Used when it is necessary to refer to the current coordinate of each driving axis during

teaching or calibration.

 Dump Info.

Used to check the message window indicating the information on the parts and feeders

dumped due to placement error.

 Dump all

Used to dump all parts picked up by the head to the dump box.

 Docking Cart

Used to manipulate the movement of the docking cart clamp in the machine to which

the docking cart is applied.

 PM Manager

The PM Manager is a management menu that is used for the maintenance of the

machine in the MMI (Man-Machine Interface), an application program for machine

operation. The items to be inspected as well as check periods can be checked through

the PM Manager, and the machine can be managed more efficiently through the

schedule check function. For more details, refer to the “Appendix. PM Manager’s

Guide” of “Administrator’s Guide”.

 Data Logging

Used to find the cause of problems occurring in the machine.

2.1.2.1.3. The submenus of the help menu

 Language

Enables indication of the messages in English while operating the equipment.

 About

Displays the equipment’s application program’s current version and miscellaneous

information.

2-4

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

 Help

Provides the help in HTML format for the application program of this equipment.

2.1.2.2. Main Toolbar

2.1.2.2.1. The submenu tool-bars of the PCB Edit menu tool-bar

 Board

 Part

 Feeder

Sets the data related to the Tape, Stick, and Tray Feeder.

 Step

Defines the step for placement operation.

 ANC Cfg

Displays the nozzle information in case the ANC setting of the current PCB file is

different from that of the current system.

 Cycle

Checks the cycle by step.

 Opti

Executes Optimizer..

 Cancel

Closes the dialog box for the Board, Part, Feeder, and Step.

 Layout

Indicates the shape of PCB and placement position of the parts.

2.1.2.2.2. The submenu tool-bars of the production menu tool-bar

 Start

Starts operation after downloading PCB.

 Stop

Stops operation.

 Cont.

Continues previous operation..

 Finish

Finishes the downloaded operation completely.

2-5

Structure of MMI Menu

 T/ F Cnt

Sets the position of the pocket to start picking up components from the Tray Feeder.

 PCB D/L

Transmits PCB operation data to the equipment. It is possible only when the

equipment status is ‘Finish’.

 Pd. Info

Checks the number of pickups, placements, and pickup error rates by head, nozzle,

and feeder.

 Flux

Perform setup for the warning message related to the operation of the flux module.

2.1.2.2.3. The submenu tool-bars of the Utility menu tool-bar

 Print

Used to print a PCB file or system data.

 Pd. Info

Reports various production management data for the equipment (PCB information,

and Log information).

 Copy ..

Use it to copy the existing PCB file data to other PCB files.

 File Man

Use it to copy, delete, rename and clear the files related to MMI.

 By Pass

Use it to bypass a PCB on the conveyor without placement operation.

 Warmup

Warms up the driving axis after power supply.

2.1.2.2.4. The submenu tool-bars of the Diagnosis menu tool-bar

 I/O

Check the I/O status.

 Conveyor

Checks the Stopper, Backup Table, Hole/Edge Fixture, and Conveyor Flow.

 Light

Checks the Camera Light.

 Vacuum

Checks the Vacuum of each head