Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第187页
7-29 Part Registration 1: Length of the r e cta ngle in the X dir ec tion 2: Length of the r e cta ngle in the Y dir ec ti on 3: Spacing in the X dir ection - bilateral symmetry - :When the outer frames of bright shapes …
7-28
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
Shape definition - Lead (Roof)
1: Lead width change (Pitch not to be changed)
2: Lead Length change (Pitch not to be changed)
3: Foot length change
Shape definition - Lead (Fork)
1: Lead width change (Pitch not to be changed)
2: Lead Length change (Pitch not to be changed)
3: Foot length change
When the lead is of coil type.
Select the shape which is adequate to recognize a coil part.
- :When the bright shapes on the right and left are recognized
clearly
Shape definition - Lead (Coil Type1)
7-29
Part Registration
1: Length of the rectangle in the X direction
2: Length of the rectangle in the Y direction
3: Spacing in the X direction - bilateral symmetry
- :When the outer frames of bright shapes on the right and left are
unclear
Shape definition - Lead (Coil Type2)
1: Length of the rectangle in the X direction
2: Length of the rectangle in the Y direction
3: Spacing in the X direction - bilateral symmetry
- :When the inner frames of bright shapes on the right and left are
unclear
Shape definition - Lead (Coil Type3)
7-30
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
1: Length of the rectangle in the X direction
2: Length of the rectangle in the Y direction
3: Spacing in the X direction - bilateral symmetry
- :When the central shape of the part is recognized clearly
Shape definition - Lead (Coil Type4)
1: Spacing in the X direction
2: Line length in the Y direction - bilateral symmetry
When the lead is of electrode type.
Since it is applied to a rectangular chip part, the shape is fixed as a
rectangle.
<Count/Count XY> edit box
When the lead is of Gull Wing, J Lead and Land type, sets the number of leads
on the selected object.
When the leads exist above/below the body center, input the number of leads
which exist in the X direction. (SOP, SOJ)
When the leads exist at the left and right of the body center, input the number
of leads which exist in the Y direction. (SOP2, SOJ2)
When the leads exist in four directions from the body center, input the number
of leads which exist in the X and Y directions. (QFP, PLCC)