Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第279页

9-5 Step Programming Moves t h e hea d assembly by dr iving the shaft of th e X a nd Y driving m otors to t he placement point of the previous row of t he current row .  <Move Next> button Moves t h e hea d assemb…

9-4

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

 <LV> column

For parts such as Shield Cap parts, which are to be placed after other parts, this

level value is set to a high value so that corresponding parts can be placed after all

parts with a low level have been placed.

 <Teach> group

Used for moving the selected object to the assigned position of coordinates by rotating

XY axis driving motor, or for obtaining the present coordinates of the selected object.

 button

Setup illumination level of fiducial camera to be used for teaching installation

position. Please refer to “8.1.2 Stick Unit” for more information.

 Combo Box

Used for selecting the object to move to the designated coordinates by rotating the

XY axis driving motor or to select the object for which the present coordinates is

searching. Selectable objects are as follows;

 Fid Cam(Option): Selects the fiducial camera of the head.

 Head 1 ~ Head 10: Selects the Head #1~Head #10 of the Front gantry

 <Move> button

Move the object selected in the Combo Box to the position of the assigned

coordinates. At this time, Before executing <Move> button, the cell in the grid

(Coordinates of installation position) corresponding to the desired position must

be clicked on.

 <Get> button

Obtain coordinates for XY axis with reference to the object selected in the Combo

Box. At this time, Before executing <Get> button, the cell in the grid (Coordinates

of installation position) corresponding to the desired position must be clicked on.

 <Use Hot Key> check box

Use the hot key to register and move the placement point.

 F2: Move the previous placement point.

 F3: Move the next placement point.

 F4: Move the placement point.

 F5: Register the placement point.

 <Move> group

Moves the head assembly by driving the shaft of the X and Y driving motors to the

placement point of the previous or following row of the current row.

 <Move Prev> button

9-5

Step Programming

Moves the head assembly by driving the shaft of the X and Y driving motors to the

placement point of the previous row of the current row.

 <Move Next> button

Moves the head assembly by driving the shaft of the X and Y driving motors to the

placement point of the following row of the current row.

 <Outline> check box

When checking the placement point, it shows pcb pattern image with the virtual

part image in the SMVision window using the Align data.

 <Auto> check box

To move continuously, check this check box. When this check box has been

clicked on and <Move Prev> or <Move Next> is clicked on.

 <Find> group

Set the string of characters to find. At this time, the column in the grid containing the

string of characters must be specified first.

 <Find Prev> button

Finds the string of characters set in the edit box in the previous lines of the current

line of the column specified in the grid.

 <Find Next> button

Finds the string of characters set in the edit box in the next lines of the current line

of the column specified in the grid.

 <Array> group

 <Block> combo box

For block PCB, first select the block to set. Then set other items.

Click the button to select the block to set. If it is not a block PCB, it is not

necessary to select the block and the corresponding Combo Box is disabled.

 <Array No.> combo box

Selects an array among the arrays for which placement point is to be indicated.

 <Extend> check box

Displayed only in the case of Array PCB. Expand the placement point to one PCB

by using the offset value of array PCB.

For example, if the number of current placement points is 10 and the number of

array PCB is 4, then the total number of placement points is expanded to 40.

If it is already expanded, returns to the original status. At this time, all placement

data disappear except for no. 1 array PCB.

9-6

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

 <Filter> Group

Designates the conditions for indicating the placement point shown in the Step dialog

box. Clicking the button will display the filtering function.

 <Filter> combo box

Selects the conditions for indicating the placement point. Either ‘Feeder’ or ‘Part’

can be selected. Default is ‘Head’.

 When Feeder is selected from the <Filter> combo box

Select the feeder for the part for which the placement point is to be indicated.

 When Part is selected from the <Part> combo box

Select the part for which the placement point is to be indicated.

 <Filtering> button

Indicates only the placement point that is filtered according to the condition

selected from the <Filter> combo box in the “Steps” dialog box.

 <Insert 1Line> button

Adds a new placement point before the line (placement point) currently selected from

the <Grid>.

 <2Pt. Teach> button

When a placement position is set, performs the function of teaching 2 corner points,

calculating the center point and using it as the placement point. Please refer to “8.1.1

Feeder Base”<2Pt. Teach…> button for more information.

 <Fiducial…> button

If the placement point has a fiducial mark, sets the fiducial mark data. Closes the

dialog box without saving the changed contents.