Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第74页
3-10 Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide <Save file as type> combo box Select f ile format to be displ ayed in th e <File list> l ist box. When the triangular But t on is clicked on, …
3-9
File Shortcut Menu
3.3. Save [Ctrl+S]
Used to perform setup related to the current PCB or to save the completed file. Clicking
the ‘Save’ icon Button and selecting ‘Save’ or ‘Save As’ will display the following dialog
box.
Figure3.6 “Save As” dialog box
<Save in> combo box
Specify the directory in which the file is located. Displays the files under the directory
specified here in the <File list> list box.
List box
Displays existing files. When a file name is clicked on, displays the file name in the
<File name> edit box.
<File name> edit box
Enter a new file name. Up to eight characters can be entered. If the number of
characters exceeds the limit or if a file with the same name already exists in the
directory, the following message box is displayed immediately after you click on the
<OK> button.
Figure3.7 “save As” message box
3-10
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
<Save file as type> combo box
Select file format to be displayed in the <File list> list box. When the triangular Button
is clicked on, accessible file types are displayed.
PCB Files(*.pcb)
Save the file names with a ‘pcb’ extension. Files with a ‘pcb’ extension are PCB
files for which optimization was not executed
PCB 40 Files(*.pcb)
Indicates only the file with extension of ‘pcb’, which is compatible to the CP40
equipment.
OPT Files(*.opt)
If the optimization is completed and automatically save as to ‘opt’ files. Files with
an OPT extension are PCB files on which an optimization result was reflected.
OPT 40 Files(*.opt)
Indicates only the file with extension of ‘opt’, which is compatible to the CP40
equipment.
XML Files(*.xml)
Save the file names with a ‘xml’ extension. Files with an ‘xml’ extension cannot
be used with our SM400 series machines and PCB files.
PCB V1 Files(*.pcb)
As a file with a ‘pcb’ extension, it allows the PCB file to be used with the machine
to which the flux system is not applied among the SM400 series models. It does
not support operation by POP method.
PCB V2 Files(*.pcb)
Saves the file with a pcb extension (MMI Version 2.0 and higher) which can
perform the POP function. This file does not support the block board function.
<Save> button
Selects a file and closes the “Save As” dialog box
<Cancel> button
Cancels the <Save As> command and closes the “Save As” dialog box.
Caution If the extension of PCB File is changed arbitrarily, the PCB
File will not be recognized.Do not change the extension of
PCB File.
3-11
File Shortcut Menu
Caution If the <Save> command is executed, the file cannot be
restored to the previous one before saving. Therefore, be
careful when executing the command.
3.4. Merge Part Library
Performs the function to compare and combine the local DB (UPD.mdb) file or updated
and distributed DB (STDUPD.mdb) of other machines with the local DB (UPD.mdb) file.
It is used mainly in the following cases.
To perform integrated management of part information of PCB files.
To import part information existing in other machines when changing the PCB model.
Memo The standard DB (STDUPD.mdb) file is a read-only file
Clicking the ‘Merge Part Library’ icon Button will display the following dialog box.
<From > button
Select the DB file from which the part information is imported. Select the local DB
(UPD.mdb) or standard DB (STDUPD.mdb) that was copied and imported through the
source DB.
<To> button
Select the DB file to be merged. Select the local DB (UPD.mdb) as the target DB.