Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第99页

4-17 Tools Shortcut M enu Indicates the presently rotated angle from the h om e position of R axis for head 2.  Head 3/Axis Z When the check box for <From home sensor> i s not ticked, the height of the nozzle tip …

4-16

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

4.6. Current Position

Mainly used when the present coordinates of each driving axis need to be referenced for

teaching or calibration.

Figure4.6 “Position” dialog box

 <Gantry> combo box

Select the gantry for which the coordinate is to be checked.

 <From Home sensor> check box

This function is used to see how much the nozzle tip of the head has been lowered

from the position of the home sensor for the Z-axis.

 Coordinates

 X [When 1F-H1 is selected]

Indicates the present position in X direction of Head 1 at the origin of the

equipment.

 Y [When 1F-H1 is selected]

Indicates the present position in Y direction of Head 1 at the origin of the

equipment.

 Mirror

Indicates the presently rotated angle from the home position of mirror rotation axis

for fly camera.

 Head Block group

 Head 1/Axis Z

When the check box for <From home sensor> is not ticked, the height of the

nozzle tip of head 1 on the PCB is indicated.

 Head 1/Axis R

Indicates the presently rotated angle from the home position of R axis for head 1.

 Head 2/Axis Z

When the check box for <From home sensor> is not ticked, the height of the

nozzle tip of head 2 on the PCB is indicated.

 Head 2/Axis R

4-17

Tools Shortcut Menu

Indicates the presently rotated angle from the home position of R axis for head 2.

 Head 3/Axis Z

When the check box for <From home sensor> is not ticked, the height of the

nozzle tip of head 3 on the PCB is indicated.

 Head 3/Axis R

Indicates the presently rotated angle from the home position of R axis for head 3.

 Head 4/Axis Z

When the check box for <From home sensor> is not ticked, the height of the

nozzle tip of head 4 on the PCB is indicated.

 Head 4/Axis R

Indicates the presently rotated angle from the home position of R axis for head 4.

 Head 5/Axis Z

When the check box for <From home sensor> is not ticked, the height of the

nozzle tip of head 5 on the PCB is indicated.

 Head 5/Axis R

Indicates the presently rotated angle from the home position of R axis for head 5.

 Head 6/Axis Z

When the check box for <From home sensor> is not ticked, the height of the

nozzle tip of head 6 on the PCB is indicated.

 Head 6/Axis R

Indicates the presently rotated angle from the home position of R axis for head 6.

 Head 7/Axis Z

When the check box for <From home sensor> is not ticked, the height of the

nozzle tip of head 7 on the PCB is indicated.

 Head 7/Axis R

Indicates the presently rotated angle from the home position of R axis for head 7.

 Head 8/Axis Z

When the check box for <From home sensor> is not ticked, the height of the

nozzle tip of head 8 on the PCB is indicated.

 Head 8/Axis R

Indicates the presently rotated angle from the home position of R axis for head 8.

 Head 9/Axis Z

When the check box for <From home sensor> is not ticked, the height of the

nozzle tip of head 9 on the PCB is indicated.

 Head 9/Axis R

4-18

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

Indicates the presently rotated angle from the home position of R axis for head 9.

 Head 10/Axis Z

When the check box for <From home sensor> is not ticked, the height of the

nozzle tip of head 10 on the PCB is indicated.

 Head 10/Axis R

Indicates the presently rotated angle from the home position of R axis for head 10.

 Mirror

Indicates the presently rotated angle from the home position of mirror rotation axis for

fly camera.

 <Close> button

Close the <Position> dialog box, End the <Current Position> command.