Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第456页

15-20 Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide Figure15.11 Wh en the Fid Camer a is selected Figure15.12 Wh en the Fix C amera is selected  <1. T est Ar ea> group Designates the area for which th…

15-19

System Setup

 For the Fly Camera

Input the side illumination value within the range of 256 values.

 For the Fix Camera

Input the side illumination value within the range of 4096 values.

 <Back1> / <Back2> column

Enabled only when the fix camera was selected. The value within the range up to

4096 for each light level is inputted.

 <Mapping/Test> button

Perform test or automatic mapping for the light level for the camera selected from the

<Select Camera> group.

Figure15.10 When the Fly Camera is selected

15-20

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

Figure15.11 When the Fid Camera is selected

Figure15.12 When the Fix Camera is selected

 <1. Test Area> group

Designates the area for which the nozzle for test checks the brightness of the

lighting. The are can be designated up to 4. the search area and excluded area are

designated together. The test area is set automatically. Do not change this value.

15-21

System Setup

Figure15.13 Bottom Shape of Calibration Nozzle for Fly Camera

Figure15.14 Bottom shape of the calibration plate for the Fid camera

Figure15.15 Bottom shape of the calibration nozzle for the Fix camera

 <2. Camera> group

Selects the camera for performing lighting brightness test or mapping. Activated

cameras can be designated at the same time.

 <3. Tool Setting> group

Performs test or preparation for mapping.

 <Prepare Test /Mapping> button

Return all nozzles mounted on the head to each corresponding ANC hole.

Before doing so, arrange the LightFly nozzle, a nozzle for calibration into the

No. 1 hole of the ANC.

If the nozzle arrangement is finished, the <Start> button and <Test> button in

the <<<Mapping>>> group.

 <4. Search Area> group

Clicking the button corresponding to the light for which mapping is to be

performed will display the following dialog box.