Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第484页
15-48 Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide Memo The list of the nozzles for which nozzle tip contamination can be checked is as follows: CN020, CN030, CN040, CN065 When these functions are enabled, …
15-47
System Setup
<Pick Vacuum> edit box
Set the standard pneumatic pressure value (as a percentage) required to determine
whether the part is successfully picked up.
Warning Changing the set up status by an unauthorized user could
damage the equipment or result in personal
injury.Unauthorized user must not change the set up status
of the equipment.
<Stuff Vacuum> edit box
Set the vacuum pressure level to be used as the criteria to determine whether there
is any foreign material in the nozzle or not before the component pick-up with a
percentage.
<Vacuum Range> edit box
Set the vacuum range for the percentages of Pick Vacuum, and Stuff Vacuum.
<Ref. Open Level> edit box
Set the base pneumatic pressure when opening the vacuum system.
<Nozzle Inspection Set...> button
Set when checking for any contaminants on the nozzle tip.
<Parameter> group
Indicates the parameter of the corresponding nozzle.
<Dirty Inspection> check box
Select this check box when checking for any contaminants on the nozzle tip using
the fly camera.
15-48
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
Memo The list of the nozzles for which nozzle tip contamination can be
checked is as follows:
CN020, CN030, CN040, CN065
When these functions are enabled, the production quality may be
improved, but productivity may decrease slightly. When using this
function, please contact our C/S.
<OK> button
Saves the data and closes the screen.
<Cancel> button
Ignores the data and closes the screen.
Diagnosis & Utility &
Production
Management