Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第72页
3-8 Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide <Part Sync> combo box Selects how to mana ge part information in PCB files as well as in the Local DB (UPD.m db) for part information with the same p…
3-7
File Shortcut Menu
3.2. Open [Ctrl+O]
<Open> command is used to edit an existing PCB file. When the <Open> command is
selected, the following dialog box is displayed.
Figure3.5 “Open” dialog box
<Look in> list box
Specify the directory in which the file is located. Displays the files in the directory
specified here in the <File list> list box.
List box
Displays existing files. When a file name is clicked on, displays the file name in the
<File name> edit box.
<File name> edit box
Enter a file name. If a file from the file list is clicked on, that file name is displayed in
the edit box.
<Files of type > combo box
Select the type of file to be displayed in the <File list> list box. When the triangular
Button is clicked on, accessible file types are displayed.
PCB Files(*.pcb)
Indicates only those file names with a ‘pcb’ extension. Files with a ‘pcb’ extension
are PCB files for which optimization was not executed.
OPT Files(*.opt)
Indicates only those file names with an ‘opt’ extension in the list box. Files with
an OPT extension are PCB files on which an optimization result was reflected.
XML Files(*.xml)
Indicates only those file names with an ‘xml’ extension. Files with an XML
extension cannot be used with our SM400 series machines and PCB files.
3-8
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
<Part Sync> combo box
Selects how to manage part information in PCB files as well as in the Local DB
(UPD.mdb) for part information with the same part name when opening a PCB file.
None
Brings the part information from the PCB file while opening the PCB file. Part
information is not updated in the local DB.
Update PCB Part from Part Library
While opening a PCB file, if the component information with the same part name
is in the local DB, selecting this check box makes the component information in
the local DB loaded instead of the component information in the opened PCB file.
Update Part Library from PCB Part
If part information with the same part name as in the PCB file exists in the local
DB while opening the PCB file, the information in the PCB file is taken and the
local DB is updated with the part information..
Part Sync by PCB and DB
When opening the PCB file, the part information in the PCB file to be opened is
overwritten with the part information in the DB. When saving the PCB file, the
part information in the PCB file is saved in the local DB.
<Open> button
Selects a file and closes the “Open” dialog box.
<Cancel> button
Cancels the file selection and closes the “Open” dialog box.
3-9
File Shortcut Menu
3.3. Save [Ctrl+S]
Used to perform setup related to the current PCB or to save the completed file. Clicking
the ‘Save’ icon Button and selecting ‘Save’ or ‘Save As’ will display the following dialog
box.
Figure3.6 “Save As” dialog box
<Save in> combo box
Specify the directory in which the file is located. Displays the files under the directory
specified here in the <File list> list box.
List box
Displays existing files. When a file name is clicked on, displays the file name in the
<File name> edit box.
<File name> edit box
Enter a new file name. Up to eight characters can be entered. If the number of
characters exceeds the limit or if a file with the same name already exists in the
directory, the following message box is displayed immediately after you click on the
<OK> button.
Figure3.7 “save As” message box