Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第476页

15-40 Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide  <Configure BCR...> button Clicking this button will display t he dialog box for the barcode scanner setup as follows.  <Enable> check box Se…

100%1 / 566
15-39
System Setup
Figure15.20 “SECS” tab dialog
<SECS Use> check box
Select this check box to perform setup for communication with the MES host.
<HSMS> group
<IP Address> edit box
Inputs the IP address assigned to the machine.
<Active Set> combo box
Sets one of the items first to which the connection command will be transmitted
for communication between the MES host and the machine.
Active: Attempts to connect the TCP/IP protocol to the host from the machine.
Passive: Attempts to connect the TCP/IP protocol to the machine from the
host.
<Port> edit box
Input the port assigned for communication between the MES host and the
machine.
<S1F13> combo box
Equipment: Attempts to connect the HSMS protocol to the host from the
machine.
Host: Attempts to connect the HSMS protocol to the machine from the host.
<Machine/ BCR> group
<Machine No.> combo box
Sets the ID so that the MES host may recognize the machine.
15-40
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
<Configure BCR...> button
Clicking this button will display the dialog box for the barcode scanner setup as
follows.
<Enable> check box
Select this check box to use the barcode reader.
<Port> combo box
Sets the port for communication between the machine and the barcode
scanner.
Check the connection status between the MES host and the machine.
When they are connected
When they are not connected
15-41
System Setup
15.5.5. <Nozzle> tab dialog
Sets the parameter of the fly camera when checking for the contamination of a nozzle tip.
Figure15.21 “Nozzle” Tap dialog
<Inspection Type> combo box
Dirty Check
Selected when checking for the contamination of a nozzle tip.
Tip Check
This function is not applied to this machine.
Holder Check
This function is not applied to this machine.
<Position> group
Z-Pos
Indicates the Z-axis height from the upper surface of the PCB to the nozzle tip
end.
M-Pos
Indicates the rotation angle of the mirror for the fly camera.
<Threshold> column
Sets the threshold of the vision system used to recognized the degree of nozzle tip
contamination.
<Light Level / Light Adjust> slide bar
Sets the lighting of the fly camera.