Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第365页

14-13 Machine Calibration <When the noz zle is not mounted on the head>  <Manual T ools> button Clicking this button will execute the “Manual Control” dialog box b y performing the same function as selected …

14-12

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

Memo When activating the <Test> button, the Offset or Count cell must be

clicked.

The coordinate system in the following figure is obtained from the

cross hair center of the vision screen.

 <Test> button

Sets the nozzle recognition condition and lighting condition by testing the binary value

of the pixel for the certain area (test box) that is set using the fly camera.

When the binary value of the pixel for the area that is used to check whether the nozzle

is mounted or not is below 30%, the nozzle is considered to be mounted. If the value is

above 30%, the nozzle is not considered to be mounted. If a nozzle actually exists, the

value must be close to ‘0’, if a nozzle does not exist, the values must be close to ‘100’.

14-13

Machine Calibration

 <Manual Tools> button

Clicking this button will execute the “Manual Control” dialog box by performing the

same function as selected by the in the View menu.

14-14

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

 Head Mirror Teaching

The default value is 18. Can be different according to the system.

1) Select the Current Position( ) in the View menu to execute the

“Position” dialog box.

2) Click the <Manual Tools> button in the ‘Nozzle Check’ tab dialog box to

execute the ‘Manual Control’ dialog box.

3) Select Mirror in the <Axis> combo box of the Axis Tab dialog box..