Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第63页

2-5 Structure of MMI Menu  T/ F Cnt Sets the position of the pocket to start picking up components from th e T ray Feeder .  PCB D/L T ransmits PCB operation data to the equipm e nt. It is possible only when the equipm…

2-4

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

 Help

Provides the help in HTML format for the application program of this equipment.

2.1.2.2. Main Toolbar

2.1.2.2.1. The submenu tool-bars of the PCB Edit menu tool-bar

 Board

 Part

 Feeder

Sets the data related to the Tape, Stick, and Tray Feeder.

 Step

Defines the step for placement operation.

 ANC Cfg

Displays the nozzle information in case the ANC setting of the current PCB file is

different from that of the current system.

 Cycle

Checks the cycle by step.

 Opti

Executes Optimizer..

 Cancel

Closes the dialog box for the Board, Part, Feeder, and Step.

 Layout

Indicates the shape of PCB and placement position of the parts.

2.1.2.2.2. The submenu tool-bars of the production menu tool-bar

 Start

Starts operation after downloading PCB.

 Stop

Stops operation.

 Cont.

Continues previous operation..

 Finish

Finishes the downloaded operation completely.

2-5

Structure of MMI Menu

 T/ F Cnt

Sets the position of the pocket to start picking up components from the Tray Feeder.

 PCB D/L

Transmits PCB operation data to the equipment. It is possible only when the

equipment status is ‘Finish’.

 Pd. Info

Checks the number of pickups, placements, and pickup error rates by head, nozzle,

and feeder.

 Flux

Perform setup for the warning message related to the operation of the flux module.

2.1.2.2.3. The submenu tool-bars of the Utility menu tool-bar

 Print

Used to print a PCB file or system data.

 Pd. Info

Reports various production management data for the equipment (PCB information,

and Log information).

 Copy ..

Use it to copy the existing PCB file data to other PCB files.

 File Man

Use it to copy, delete, rename and clear the files related to MMI.

 By Pass

Use it to bypass a PCB on the conveyor without placement operation.

 Warmup

Warms up the driving axis after power supply.

2.1.2.2.4. The submenu tool-bars of the Diagnosis menu tool-bar

 I/O

Check the I/O status.

 Conveyor

Checks the Stopper, Backup Table, Hole/Edge Fixture, and Conveyor Flow.

 Light

Checks the Camera Light.

 Vacuum

Checks the Vacuum of each head

2-6

Fast Flexible Placer SM481(L) PLUS Administrator’s Guide

 Jogbox

Checks the Teaching box function.

 Tray

Checks the Tray Feeder function.

 Motor IO

Indicates the status of sensor inputs related with each motor.

2.1.2.2.5. The submenu tool-bars of the Sys-setup menu tool-bar

 Head

Calibrates the items related with the head.

 Conv.

Sets up the items related with the conveyor.

 Pos.

Sets up the items related with the feeder base and system dump box.

 Camera

Sets up the items related with the camera and lighting.

 Periph.

Perform setups related to the user defined dump box, tray feeder and peripheral

equipment.

 Light

Executes light mapping.

 Calib.

Perform complete calibration for the equipment.

 Pref.

Sets various options necessary for equipment operation.

 Device

Manages data related to the Tape, Stick, and Nozzle.